Table of Contents
Advertisement
•
For performance issues, we strongly suggest you don't install a CD-ROM or DVD-ROM
drive on the same IDE channel as a hard disk. Otherwise, the system performance on this
channel may drop.
(9) Serial-ATA Port connector: SATA1 / SATA2
This connector supports the provided Serial ATA IDE hard disk cable to connecting the
motherboard and serial ATA hard disk.
2-6-2 Headers
(1)
COM2 Serial Port Headers (9-pin) : COM2
This board has two serial port COM1 (Connector)/COM2(Headers), it come with cable
providing serial port COM1/COM2. The On-board serial port can be disabled through
BIOS SETUP. Please refer to Chapter 3 "INTEGRATED PERIPHERALS SETUP" section
for more detail information.
Pin 1
Note: Orient the read marking on the
COM1/2 ribbon cable to pin 1
COM2
14
Advertisement
Table of Contents
