Wake Up Events - JETWAY J7F3 Series User Manual

3-8-1 Wake Up Events

IRQ [3-7,9-15]
IRQ 8 Break Suspend
Ring Power Up Control
MACPME Power Up Control
PCPME Power Up Control
PS2KB Power Up Control
PS2MS Power Up Control
Power Up by Alarm
Month Alarm
Day Of Month Alarm
Time (hh:mm:ss)
↑↓→← Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Power Up by Alarm
During Disabled, the system will ignore any incoming call from the modem/LAN. During
Enabled, the system will boot up if there's an incoming call from the modem/LAN.
Month Alarm / Day Of Month Alarm
This function is for setting date and time for your computer to boot up. During Disabled, you
cannot use this function. During Enabled, choose the Date and Time Alarm:
Date(of month) Alarm
You can choose which month the system will boot up. Set to 0, to boot every day.
Time(hh:mm:ss) Alarm
You can choose what hour, minute and second the system will boot up.
Note: If you have change the setting, you must let the system boot up until it goes to the
operating system, before this function will work.
Phoenix – AwardBIOS CMOS Setup Utility
Wake Up Events
Enabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
NA
NA
0:0:0
F6:Optimized Defaults
Menu Level >>
F7:Standard Defaults
32
Item Help
F1:General Help