Toshiba MD911 Instruction Manual page 36

Chapter 3 Setting
Set module parameters.
The details of the module parameters are shown below.
Station No.:
Set the address value of the MD911 on the MODBUS network.
(Set the same value as the MODBUS station address setting switch of the
MD911.)
Transmission speed:
Set the transmission speed (9600bps, 19200bps) for the target MODBUS device.
Parity:
Set parity setting (no, odd, even).
Transmission type:
Set the transmission path (RS232C, RS485-2W, RS485-4W) for connecting with
the target MODBUS device.
24
6F8C1399
In the module parameter setting screen of the MD911, set the module
parameters for the MD911.
Figure 3-5 Module parameter setting screen