Toshiba MD911 Instruction Manual page 43

■ Registering network variables
From the talker block edit screen, start the network variable edit screen, and
register network variable names to the common memory for each talker block.
In the talker block edit screen, click the [Open Network] button to start the
network variable edit screen.
Unlock the edit lock.
In the upper half of the network edit screen, register network variables to the
talker block.
A talker block can be selected in the [Talker Block] pull-down menu.
Figure 3-11 Network edit (talker block selection) screen
In the lower half of the network edit screen, register the network variables as
input data.
From the [InNode] and [In Controller] pull-down menus, select the controller
inputting the network variables.
3.3 Setting with the Engineering Tool (master mode)
Unified Controller nv series MODBUS (MD911) Module Instruction Manual
31