Advertisement
Quick Links
Advertisement
Related Manuals for TOORX BRX50
Summary of Contents for TOORX BRX50
- Page 1 INSTRUCTION...
- Page 3 ASSEMBLY INSTRUCTIONS Step 1 Assembly the rear and front stabilizer (F&E) with 4 bolts (E-1), 4 nuts (E-4) and 4 washers (E-3).
- Page 4 Step 2 Loosen the seat post knob (G-5), insert the seat post (D) into the support tube, tighten the knob. Step 3 Assemble the saddle (D-3) onto the slider set (D-5) with three nuts and washers, fix the saddle. Assemble the slider set with the seat post with Knob (D-1) and flat washer (D-2).
- Page 5 Step 4 Loosen the four screws (G-2) and four washers (E-3). Connect the tension control upper (C-2) & lower (G-4), connect the sensor cable upper (C-1) & lower (G-3). Insert handle bar post (C) onto the support tube, tighten with four screws and washers. Step 5 Put the handle bar (B) into the metal bracket, make the hand pulse cable...
- Page 6 ASSEMBLY INSTRUCTIONS Step 6 Connect the hand pulse cable between computer and handle bar (A-2&B-3), connect the sensor cables (A-1&C-1), fix the computer onto the metal plate with two screws (A-3). Step 7 Assemble the left hand pedal (M-L) and the right hand pedal (M-R) to the hand crank.
-
Page 7: Parts List
PARTS LIST DESCRIPTION Q'TY Computer 1SET Sensor cable Hand pulse cable Screw 2PCS Handle bar set 1SET End cap 2PCS Handle bar foam 2PCS Hand pulse cable Hand grip 2PCS Flat washer Spring washer Bushing Handle bar cover T-knob Handlebar post set 1SET Sensor cable (upper) Tension controller(Upper) - Page 8 Screw 4PCS Sensor cable (lower) Tension control (lower) Seat post knob Plastic sleeve Plastic pully Crank Belt Right thread Ball retainer 2PCS Bottom bracket 2PCS Left thread Have tooth washer Hex. nut Flywheel Flywheel bearing 6900 bearing Bushing 5PCS 6000 bearing Idle set 1SET Idle wheel...
-
Page 9: Complete Bike Assembly
COMPLETE BIKE ASSEMBLY EXERCISE COMPUTER Monitor Display... - Page 10 FUNCTION BUTTON Press "MODE" to select each function display on the main screen. MODE Can to proceed the data establish for “TIME””DISTANCE””CALORIES” Hold two seconds to reset all of the values to zero. RESET FUNCTIONS SCAN Automatically scan through each mode in sequence every 6 seconds. The display loop is TIME- SCAN-DISTANCE-CALORIE-SPEED on the main screen.
- Page 11 GARLANDO SPA Via Regione Piemonte, 32 - Zona Industriale D1 15068 - Pozzolo Formigaro (AL) - Italy www.toorx.it - info@toorx.it...
Need help?
Do you have a question about the BRX50 and is the answer not in the manual?
Questions and answers