Advertisement
Quick Links
Advertisement
Related Manuals for TOORX BRX AIR300
Summary of Contents for TOORX BRX AIR300
- Page 1 INSTRUCTION...
-
Page 2: Exploded Diagram
EXPLODED DIAGRAM... -
Page 4: Hardware Package
HARDWARE PACKAGE... -
Page 5: Parts List
PARTS LIST Description Qty. Description Qty. Computer Saddle Fixed Plate Bolt M5*10 Saddle End Cap Rear Stabilizer Trunk Wire Bolt M4*10*Φ8 Outside Button Of Net-caps Computer Post Bolt M5*15*Ф8.5 Inside Button Of Net-caps Front Bottle holder 45L/R 1set Net-caps Rear Bolt M8*20*S5 46L/R Net-caps... - Page 6 Description Qty. Description Qty. Spring d17 Axle Bearing 6203-2RS Bolt M6*16*S5 Spring D40 Belt Bolt M6*16*S10 Plastic Pedal Washerd6*Φ20*2 Magnet φ15*7 Small Crank Grommet Φ12.5 Bolt M8*40*S6 Wave washer d10*Φ15*0.3 Bearing 6004-2RS Allen Wrench S5 Spacer Φ25*Φ20.1*4 Spanner S13-14-15 Belt Plate...
- Page 7 ASSEMBLY INSTRUCTIONS STEP 1: Attach the front stabilizer(17) and rear stabilizer(41) to main frame(30) using 4 bolts(22), 4 arc washers(18), 4 spring washers(9) and 4 cap nuts(19) by spanner(B).
- Page 8 STEP 2: A. Insert saddle tube(38) into main frame(30), then secure with knob(32). B. Secure saddle fixed plate(39) in the saddle tube(38) using knob(35) and washer(36). C. Attach the saddle(40) into saddle fixed plate(39), then secure them by spanner(B).
- Page 9 STEP 3: A. Unlock 4 bolts(8), 4 spring washers(9) and 4 arc washers(10) from main frame(5) by allen wrench(A). B. Connect sensor wire(62) and trunk wire(4) well. C. Insert wire into main frame(30), then insert computer post(5) into main frame(30), and secure them using 4 bolts(8), 4 spring washers(9) and 4 arc washers(10) by allen wrench(A).
- Page 10 STEP 4: A. Unlock 2 bolts(6) and 4 bolts(2) from computer post(5) by spanner(B). B. Secure bottle holder(7) in the computer post(5) using 2 bolts(6) by spanner(B). C. Connect trunk wire(4) and computer wire(1a) well. D. Secure computer(1) in the computer post(5) using 4 bolts(2) by spanner(B).
- Page 11 STEP 5: A. Unlock 4 bolts(8), 4 spring washers(9) and 4 arc washers(10) from swing bar(26) by allen wrench(A). B. Attach handlebar(27L/R) into swing bar(26). C. Secure pedal plate(23L/R) and handlebar(27L/R) into swing bar(26) using 4 bolts(8), 4 spring washers(9) and 4 arc washers(10) by allen wrench(A).
- Page 12 STEP 6: Connect the left & right pedals (31L/R) onto the left & right cranks (75L/R). Left Pedal: Align the left pedal (31L) with the left crank (75L) at 90 degrees and gently insert the pedal into the crank arm. Turn the pedal counter-clockwise as tightly as you can with your hand.
-
Page 13: Moving The Machine
MOVING THE MACHINE To move the machine, lift up the handlebar of rear stabilizer(41) until the transportation wheels on the front stabilizer(17) touch the ground. With the wheels on the ground, you can transport the bike to the desired location with ease. - Page 14 Instruction Manual DISPLAY FUNCTIONS TIME DESCRIPTION ·Display the rotation per minute with range from 0~ 199. ·Display current training speed. Maximum speed is 99.9 KM/H or ML/H. SPEED ·Count up - No preset target, Time will count up from 00:00 to maximum 1:59:59 TIME with each increment is 1 minute.
- Page 15 2. The window of INTERVAL10/20、INTERVAL10/20、NTERVAL CUSTOM、READY、WORK、REST、TIME、DISTANCE、CALORIES、WATTS、SPEEED、RPM will flash by sequence in every 1s (Figure 4~Figure 16). If no input of key operation or RPM signal or pulse input for 60s, computer will go to Sleeping mode.
- Page 16 3.Select Manual, Interval, Target Distance, Target Calories, Target HR, Target Time program: 3.1 Manual mode: ①In Standby mode, press START to start workout quickly, the b uzzer sound 1 s econd. TOTAL TIME/ TIME/DISTANCE/ CALORIES/ WATTS/ SPEED/ RPM s tart to count up (Figure 17). ②Whenever there is Pulse signal input, will light up and symbol will flash and display pulsevalue (Figure 18).
- Page 17 display total consumption during workout; WATT, SPEED and RPM will switch to display AVG. & MAX.PULSE window will switch to display 65%, 85% MAX (Figure 21~23) each 5s. ⑥With pulse signal i nput, PULSE window will display u ser actual pulse. Pulse window displays nothing if n o pulse signal input (Figure 19~20).
- Page 18 display 65%, 85% MAX (Figure 21~23) each 5s. ⑧With pulse signal input, PULSE window will display user actual pulse. Pulse window displays nothing if no pulse signal input (Figure 19~20). ⑨Press any PROGRAM key then perform the program accordingly. ①Press INTERVAL to select INTERVAL CUSTOM, press ENTER to enter into this mode then INTERVAL CUSTOM 3.4 Interval CUSTOM: 00/XX flashes...
- Page 19 ⑪With pulse signal input, PULSE window will display user actual pulse. Pulse window displays ⑫Press any PROGRAM key then perform the program accordingly. nothing if no pulse signal input (Figure 19~20). 3.5 Target TIME mode: ①In Standby mode, press Target Time key and. TIME will light up, along with a long sound for 1s.
- Page 20 ⑧Press any PROGRAM key then perform the program accordingly. ① In standby mode, press Target Time key and 3.6 Target Distance mode: TIME will light up, along with a long sound for 1s. ②DISTANCE value is flashing, press UP and DOWN to adjust (Figure 41). Press ENTER to confirm meanwhile buzzer beeps 1s andDISTANCE lasting lighting up.
- Page 21 3.8 Target HR mode: ①In Standby mode, press Target Heart-Rate key and will light up, along with along sound for 1s. ②AGE value is flashing, press UP and DOWN to preset your Age (Figure 45). Press ENTER to confirm along with buzzer beeps 1s and and HEART RATE last lighting up.
- Page 22 RESET mode- 1. In any mode, press STOP for 2s, system will do TOTAL RESET. 2. LCD falsh in every 2 seconds, buzzer sound for 2 seconds. 3. Reverse to Standby page, all setting resume to preset value. SLEEPING mode- In Standby mode, if no key press/RPM for 30s, console will go to SLEEPING mode.
Need help?
Do you have a question about the BRX AIR300 and is the answer not in the manual?
Questions and answers