The built-in control panel of the unit features four operating buttons and a display which shows all operation
statuses. After connecting the unit to the mains it requires a short initialization process and is then ready for
operation. The display indicates the last operating mode. The operating modes can be selected by means of the
display and the control buttons. All settings remain stored even if the device is disconnected from the mains.
Operating buttons
MENU
ENTER
UP
DOWN
Menu structure
Display
Addr
A001-512
Shou
Sh 1
SP00-99
Sh 2
SP00-99
Sh 3
SP00-99
Sh 4
Soun
on
off
Ver
TeNP
Automatic mode
In automatic mode, 4 show programs are available of which 3 run at an adjustable speed. Make sure sound control
in menu item Soun is disabled (off setting).
1
Press the MENU button so many times until Shou is indicated in the display. Confirm with the ENTER button.
2
Use the UP and DOWN buttons to select the desired show program. Confirm with the ENTER button. The
display indicates menu item running speed.
3
Use the UP and DOWN buttons to adjust the running speed of the program from SP00 (slow) to SP99 (fast).
Sound control
Via the integrated microphone the unit can perfectly reproduce the show programs to the rhythm of the music
(sufficient bass provided).
1
Select the desired show program in menu item Shou as described above.
Then press the MENU button so many times until Soun is indicated in the display. Confirm with the ENTER
2
button.
3
Activate sound control mode by selecting on with the UP and DOWN buttons.
4
Adjust the microphone sensitivity to the volume of the music with the SENSITIVITY control.
MENU SETTINGS
Selects the operating mode or returns to the initial screen.
Activates a value to be modified or saves a value when modifying.
Selects the next menu item or increases values when modifying.
Selects the previous menu item or decreases values when modifying.
Function
DMX start address setup
Show program 1: LED derby
Program running speed (slow > fast)
Show program 2: laser
Program running speed (slow > fast)
Show program 3: LED derby + Laser
Program running speed (slow > fast)
Show program 4: LED derby + laser with changing running speed
Sound control show programs 1-4
Automatic mode show programs 1-4
Indication of the firmware version
Indication of the internal temperature
OPERATION WITHOUT EXTERNAL CONTROL
23 • EN