Operation; Menu Structure; Stand-Alone Mode - EuroLite LED TL-4 User Manual

OPERATION

After connecting the device to the mains it is ready for operation. The display indicates the last operating
mode. The operating modes can be selected by means of the display and the control buttons. All settings
remain stored even if the device is disconnected from the mains. The device can be operated in stand-alone
mode via the control board and the EUROLITE IR-7 remote control or in DMX-controlled mode via any
commercial DMX controller.

Menu structure

Mode
DMX mode
Preset colors
Automatic mode
Sound control
Running speed in
automatic mode and for
sound control
Microphone sensitivity
for sound control
Individual color mix
Dimmer
Sound control silent
scene
Slave mode
IR remote control

Stand-alone mode

Preset colors
In the Stat mode the device will constantly emit one of 18 preset colors.
1 Press the MENU button so many times until Stat is indicated in the display. Confirm with the ENTER
button.
2 Use the buttons UP and DOWN to adjust the desired color. Confirm with the ENTER button.
Display
8CH
4-1CH
Addr
4CH
3CH
Stat S 01-18
Au – 1
Auto
Au – 2
So – 1
Soun
So – 2
SPEE SP 1-9
SEnS SE 1-9
R000-255
G000-255
Colo
B000-255
u000-255
diMM dI 1-dI 9
on
SILE
oFF
SLAU SLAU
on
InFr
oFF
24/32
d001-512
8-channel mode and start address
d001-512 4-1channel mode and start address
d001-512 4-channel mode and start address
d001-512 3-channel mode and start address
Constant lighting in one of 18 colors
Program 1: color fade
Program 2: color change
Program 1: color fade
Program 2: color change
Program running speed, slow > fast
Microphone sensitivity, low > high
Red 0-100%
Green 0-100%
Blue 0-100%
UV 0-100%
Total brightness (Stat, Auto, Soun,
and Colo modes)
dark > bright
LEDs off if there is no music signal
LEDs remain on if there is no music signal
Slave mode
IR remote control on
IR remote control off
Function
00122447, Version 1.0