Download Print this page

Advertisement

Quick Links

Advertisement

loading

Summary of Contents for EuroLite DS-10

  • Page 2 With a voltage of 230V you tan suffer 8 dangerous electric shock when touching the wires! Thank you for having Chosen a EUROLITE DS-10. The DS-10 features a built-in micro. Unpack your DS-10. Before you initial start-up, please make sure that there is no darnage caused by transportation. Should there be any, consult your deaier and do not use the device.
  • Page 3 Order to obtain the best Ventilation possibie, keep the venting Slots clean from dust and dirt. We also recommend frequent cieaning of the lenses and mirrors. if the lamp burns out the fine-wire fuse of the DS-10 might fuse, too. Replace the fuse by a fuse of same type and rating.
  • Page 4 Operation! not flash the DS-10. Flashing the lighting effect will reduce the lamp’ s life because the resulting heat in general, lighting effects are not designed for permanent Operation. Consistent Operation breaks will ensure that the device will serve you for a long time without defects.