Operation; Menu Structure - EuroLite LED PIX-72 User Manual

OPERATION

After connecting the device to the mains it is ready for operation. The display indicates the last operating
mode. The operating modes can be selected by means of the display and the control buttons. All settings
remain stored even if the device is disconnected from the mains. The device can be operated in stand-alone
mode via the control board or in DMX-controlled mode via any commercial DMX controller.

Menu structure

Press the MENU button so many times until the desired function is indicated on the display. Use the ENTER
button to select the function. With the buttons UP and DOWN you can select the mode. Confirm with
ENTER.
Mode
DMX mode
Slave mode and
blackout function
Sound control
Automatic mode
Color mix
Display reverse
Software version
Default
Display
Addr 001-512
12C2
12C1
Chnd 6CH
5CH
3CH
MASt
Slnd
SL1-SL2
So 0 – So16
SoUn
Se00 – Se99
Au 0 – 16
Auto
SP 1 – SP 9
red 000-255
CoLo Gree 000-255
bLue 000-255
disp
dsip
Ver
rset
23/28
Setting DMX starting address
d001-512 12-2-channel mode
d001-512 12-1-channel mode
d001-512 6-channel mode
d001-512 5-channel mode
d001-512 3-channel mode
Master mode
Blackout function in case of missing
d512
DMX signal
Slave mode
Sound-controlled programs
Microphone sensitivity
low > high
Automatic show programs
Running speed
slow > fast
Red 0-100%
Green 0-100%
Blue 0-100%
Display normal
Display reversed (180°)
V10 Indicates software version
Reset to factory settings
Function
00135837, Version 1.0