Region Selection; Properties Menu; Setting - Toshiba TECRA A2 User Manual

The internal modem does not support voice functions. All data and fax
functions are supported.
In case of a lightning storm, unplug the modem cable from the
telephone jack.
Do not connect the modem to a digital telephone line.
A digital line will damage the modem.

Region selection

Telecommunication regulations vary from one region to another, so you will
need to make sure the internal modem's settings are correct for the region
in which it will be used.
To select a region, follow the steps below.
1. Click start, point to All Programs, point to TOSHIBA Internal Modem
and click Region Select Utility.
Do not use the Country/Region Select function in the Modem setup utility
in the Control Panel if the function is available. If you change the Country/
Region in the Control Panel, the change may not take effect.
2. The Region Selection icon will appear in the Windows Task Bar.
Click the icon with the primary mouse button to display a list of regions
that the modem supports. A sub menu for telephony location
information will also be displayed. A check will appear next to the
currently selected region and telephony location.
3. Select a region from the region menu or a telephony location from the
sub-menu.

Properties menu

Click the icon with the secondary mouse button to display properties menu
on the screen.

Setting

You can enable or disable the following settings:
AutoRun Mode
The Region Select utility starts automatically when you start up the
operating system.
User's Manual
When you click a region it becomes the modem's region selection,
and the New Location for telephony will be set automatically.
When you select a telephony location, the corresponding region is
automatically selected and it becomes the modem's current region
setting.
Operating Basics
4-17