Region Selection; Properties Menu - Toshiba A200 Series User Manual

Region selection

Telecommunication regulations vary from one country/region to another, so
you will need to make sure the internal modem's settings are correct for the
country/region in which it will be used.
1. Open the Modem Region Select application. It is located on the
Do not use the Country/Region Select function in the Modem setup utility
in the Control Panel if the function is available. If you change the
Country/Region in the Control Panel, the change may not take effect.
2. The Region Selection icon appears on the Windows Task Bar.
3. Click the icon with the primary mouse button to display a list of regions
4. Select a region from the region menu or a telephony location from the

Properties menu

Click the icon with the secondary mouse button to display the following
menu.
Downloaded from LpManual.com Manuals
User's Manual
Programs menu at TOSHIBA
that the modem supports. A sub menu for telephony location
information will also be displayed. A check will appear next to the
currently selected region and telephony location.
submenu.
When you click a region it becomes the modem's region selection,
n
and the New Location for telephony will be set automatically.
When you select a telephony location, the corresponding region is
n
automatically selected and it becomes the modem's current region
setting.
Networking.
The Region Selection icon
The properties menu
Operating Basics
4-6