Using The Usb Floppy Disk Drive; Connecting 3 1/2" Floppy Disk Drive - Toshiba TECRA A2 User Manual

Operating Basics
Click: Tap the Touch Pad once
Double-click: Tap the Touch Pad twice
Drag and drop:
1. Hold down the left control button and move the cursor to drag the item
you want to move.
2. Lift your finger to drop the item where you want it.
Scroll:
Vertical: Move your finger up or down the right edge of the Touch Pad.
Horizontal: Move your finger left or right along the bottom edge of the
Touch Pad.

Using the USB floppy disk drive

A 3 1/2" floppy disk drive connects to the computer's USB port. It
accommodates 1.44-megabyte or 720-kilobyte floppy disks. Refer to
Chapter 2,

Connecting 3 1/2" floppy disk drive

To connect the drive, plug the floppy disk drive connector into a USB port.
Refer to Figure 4-2.
Make sure the connector is right side up and properly aligned with the
socket. Do not try to force the connection; doing so can damage the
connecting pins.
If you connect the floppy disk drive after turning on the computer, it will
take about 10 seconds for the computer to recognize the drive. Do not
disconnect and reconnect before 10 seconds has elapsed.
4-2
The Grand Tour, for more information.
Figure 4-2 Connecting the USB floppy disk drive
User's Manual