Pc Card; Inserting A Pc Card - Toshiba TECRA A2 User Manual

Optional Devices

PC card

The computer is equipped with a PC card expansion slot that can
accommodate one 5 mm Type II card. Any PC card that meets industry
standards (manufactured by TOSHIBA or other vendor) can be installed.
The slot supports 16-bit PC cards, including PC card 16's multifunction
card and CardBus PC cards.
CardBus supports the new standard of 32-bit PC cards. The bus provides
superior performance for the greater demands of multimedia data
transmission.

Inserting a PC card

The PC card connector is located on the left side of the computer.
Windows' hot-install feature lets you insert PC cards while the computer's
power is on.
Do not insert a PC card while the computer is in standby or hibernation
mode. Some cards might not work properly.
An HDD or CD-ROM/DVD-ROM connected to a 16-bit PC card, might
affect the performance of the computer's sound system and data
transmission, including slower transmission speeds and dialing errors.
To insert a PC card, follow the steps below.
1. Insert the PC card.
2. Press gently to ensure a firm connection.
After inserting the card, refer to the card's documentation and check the
configuration in Windows to make sure it is appropriate for your card.
8-2
Figure 8-1 Inserting the PC card
PC card
User's Manual