Dvd-Rom Drive - Toshiba TECRA A2 User Manual

Problem
Some CDs run correctly,
but others do not

DVD-ROM drive

For more information, refer to Chapter 4,
Problem
You cannot access a CD/
DVD in the drive
Some CD/DVDs run
correctly, but others do not
User's Manual
Procedure
The software or hardware configuration may
be causing a problem. Make sure the
hardware configuration matches your
software's needs. Check the CD's
documentation.
Check the type of CD you are using. The
drive supports:
CD-ROM: CD-DA, CD-Text, Photo CD
(single/multi-session), CD-
ROM Mode 1, Mode 2, CD-
ROM XA Mode 2 (Form1,
Form2), Enhanced CD (CD-
EXTRA), CD-G (Audio CD
only), Addressing Method 2
If problems persist, contact your dealer.
Operating Basics
Procedure
Make sure the drive's drawer is securely
closed. Press gently until it clicks into place.
Open the drawer and make sure the CD/
DVD is properly seated. It should lie flat with
the label facing up.
A foreign object in the drawer could block
laser light from reading the CD/DVD. Make
sure there is no obstruction. Remove any
foreign object.
Check whether the CD/DVD is dirty. If it is,
wipe it with a clean cloth dipped in water or
a neutral cleaner. Refer to the
section in Chapter 4 for details on cleaning.
The software or hardware configuration may
be causing a problem. Make sure the
hardware configuration matches your
software's needs. Check the CD/DVD's
documentation.
Troubleshooting
Media care
9-9