Toshiba TECRA A2 User Manual page 189

2. Some reproduced DVD picture may not be displayed when the display
of the computer and a CRT display are used at the same. Reduce the
resolution, use the display of the computer only, use the CRT display
only or set display device in the multi-monitor, then play DVD.
3. The reproduced picture may be up and down slightly in some DVD titles
when reproduced by WinDVD 5.0. The swing can be suppressed by the
following procedure:
User's Manual
FigureB-2 Intel® 82852/82855 GM/GME Graphics Controller Prope...
Please refer to External monitor in the online manual of Chapter8
Optional Devices or the application guide for the setting of each
display device.
Boot up WinDVD 5.0 and click the circled part shown in figure B-3,
then select [Display] out of the list.
The following sub-panel is displayed, then click the circled part
shown in figure B-5.
Figure B-3 WinDVD 5.0
Display Controller and Modes
B-11