Table of Contents
Advertisement
Chapter 6 – Maintenance
The KPM(T) monitors are designed to withstand the harsh environment of the factory
floor. Routine maintenance can help keep your system in good operating condition.
Preventive maintenance consists of several basic procedures that will greatly reduce
the chance of system malfunction. Schedule preventive maintenance along with the
regular equipment maintenance to minimize down time.
General Preventive Maintenance
Here are some preventive measures you can take:
Clean the monitor screen using a non-residue cleaner such as a mild window
• • • •
cleaning solution or CRT screen cleaner. Take care not to scratch the screen
face.
Base your maintenance schedule on the type of environment the system is in
• • • •
(i.e., if the area is dusty, you should schedule maintenance more often than if
it is a dry, clean area).
Check the connections to I/O modules, especially in environments where
• • • •
vibration could loosen the connections. Check to see that all plugs, sockets,
terminal strips, and module connections are solid.
Remove unnecessary articles, such as drawings or manuals, from the unit.
• • • •
They can obstruct airflow and create hot spots, which cause the system to
malfunction.
Do not place noise-generating equipment near the KPM(T) monitor.
• • • •
!
,
The KPM(T) monitor has no accessible fuse. Return the unit to the factory for fuse
replacement.
Troubleshooting
Pro-face Technical Support offers a variety of support options to answer
any questions about Pro-face products and their implementation. You may
call Technical Support directly at 734-944-0482, or via email at
support@profaceamerica.com.
"
Before contacting Technical Support, refer to the relevant chapter(s) in your
documentation for a possible solution to any problem you may have with your
system.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
. '
!
48
143448 (D)
Advertisement
Table of Contents
