Safety Agency Approval - Xycom KPM Series User Manual

KPM(T) Series Flat Panel Industrial Monitor
" #
The Pro-face systems have the following approvals:
Underwriters Laboratories Inc., UL 1604 Standard for Safety. Electrical
• • • •
equipment for use in Class I and Class II, Division 2, and Class III hazardous
(classified) locations (UL Listed, File E180970)
Underwriters Laboratories Inc., UL 508, "Industrial Control Equipment"
• • • •
(UL Listed, File E107636)
Canadian Standard Association, Specification C22.2 No. 213-M1987. Non-
• • • •
incendiary electrical equipment for use in Class I, Division 2 Hazardous
Locations (cUL Listed, File E180970)
Canadian Standards Association, Specification C22.2 No. 142, Process
• • • •
Control Equipment (cUL Listed, File E107636)
Suitable for use in Class I, Division 2, Groups A, B, C, and D, and Class II, Division 2,
Groups F and G Hazardous Locations or non-hazardous locations only.
Substitution of components may impair suitability for Class I, Class II, Division 2.
La substitution de composants peut rendre ce materiel inacceptable pour les
emplamements de classe I, II, Division 2.
Do not disconnect equipment unless the power has been switched off or the area is
known to be non-hazardous.
Avant de deconnecter l'equipment, coupler le courant ou s'assurer que l'emplacement
est designe non dangereux.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
#
Warning
Warning – Explosion Hazard
Avertissement – Risque d'Explosion
Warning – Explosion Hazard
Avertissement – Risque d'Explosion
24
Chapter 2 – Installation
143448 (D)