Table of Contents
Advertisement
Chapter 3 – Monitor Settings
KPM(T) Series Flat Panel Industrial Monitor
Functions menu. Use INC or DEC to highlight one of the adjustment menus, and
SELECT to access it. The adjustment menus are explained in Figure 3-2.
Note
The OSD will time out if you do not complete a task within a specified time period.
The default setting is 15 seconds, but you can change the setting in the OSD Timeout
submenu, under Miscellaneous.
* $ !
Figure 3-2.OSD Functions menu
Press MENU to select the highlighted adjustment menu; the first adjustment option in
the menu will be highlighted. Use INC or DEC to select a submenu, and then press
SELECT to access the submenu. Use INC or DEC to adjust the value of the
highlighted option. Press SELECT to save the changes or MENU to cancel. Repeat
the instructions above for selecting another adjustment menu. Press MENU again to
exit the OSD adjustment menus.
32
143448 (D)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Advertisement
Table of Contents
