Table of Contents
Advertisement
Chapter 3 – Monitor Settings
On Screen Display (OSD) Switch
The OSD Select switch is located on the back panel and offers two choices: OFF or
ON. The OSD keys can be locked-out by setting the OSD switch to OFF, or unlocked
by setting the OSD switch to ON. Setting this switch to the OFF position will help
prevent accidental changes to the settings. The OSD switch is next to the Menu,
Select and Increase/Decrease buttons (see Figure 3-1).
Touch data is transmitted to host computer while OSD menu is displayed.
Mode and Image Adjustment
Not all video controllers produce exactly the same video output levels or the same
timing. The KPM(T) monitors use onscreen configuration menus to make setup and
adjustment easy. The menus are selected and the menu items are adjusted using the
buttons located on the back panel of the monitor (see Figure 3-1). You need only tap
the buttons to activate each one. Table 3-1 outlines the functions of these controls.
Controls
!
With the OSD enabled, use the back panel control buttons to navigate through the
adjustment menus and make adjustments. Press MENU to view the onscreen OSD
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Caution
Figure 3-1. Back Panel Control Buttons
Table 3-1. Back Panel Control Button Functions
Function
!
"
"
31
#
$
143448 (D)
Advertisement
Table of Contents
