Solid-State Drive - HP ENVY x360 Series Maintenance And Service Manual

Solid-state drive

Table 5-3 Solid-state drive description and spare part number information
Description
1-TB, PCle, NVMe solid-state drive with TLC
512-GB, PCIe, NVMe, solid-state drive with TLC
512-GB, PCIe, NVMe, solid-state drive
512-GB, PCle, NVMe +32-GB solid-state drive with X point
256-GB, PCIe, NVMe, solid-state drive with TLC
256-GB, PCIe, NVMe, value solid-state drive
128-GB, M.2, SATA-3 solid-state drive with TLC
Solid-state drive shield
Before removing the solid-state drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
Remove the solid-state drive:
1. Remove the Phillips M2.0×3.8 screw (1) that secures the solid-state drive to the system board.
Bottom cover on page
Battery on page 30).
28).
Component replacement procedures
Spare part number
L53562-001
L53563-001
L53566-001
L53567-001
L53564-001
L53565-001
L53872-001
L53567-001
31