infaco POWERCOUP PW2 Series User Manual page 13

10 speed increments available between 800 and 1200 r/min
A/
Start the machine
C/
x10 short pulls
2
Select the requested speed with successive short pulls on the trigger. 10 speed
increments available.
Validate the requested speed and exit the set-up mode with a long pull on the
trigger until the machine stops completely.
The machine is ready to work, the speed will be locked until the next set-up.
The tool is fi tted with an electronic protection system. As soon as the rake becomes
blocked due to meeting strong resistance, the electronic system causes the motor to stop.
SETTING OF ROTATION SPEED
ON
B/
To enter the set-up mode, do a long pull
on the trigger.
The machine starts automatically at the
fi rst increment on low speed.
x1 long pull