NEC UNIVERGE SV8100 Manual page 30

Ip trunk

Hide thumbs Also See for UNIVERGE SV8100:

Delete IP Terminals

Registered IP Terminal can be deleted by programming.

1. Remove IP Terminal you want to delete from LAN port.

2. Enter PRG Mode and PRG90-23.

3. Key in the desired Extension Number and press "MIC" Key.

(Cursor shall move to lower line)

4. Dial "1" and press "Transfer" Key.

5. Exit from PRG Mode.

Note 1 : Remove IP Terminal before deleting operation by PRG90-23 otherwise the system will try

to re-register this IP Terminal.

Note 2 : After deleting IP Terminal and re-register later, the system might not provide same

Extension Number to this IP Terminal, if other IP Terminals has been registered.

To confirm delete status

1. Enter PRG Mode and PRG15-02.

2. Key in the desired Extension Number and press "MIC" Key.

(Cursor shall move to lower line)

3. MAC Address is indicated "00-00-00-00-00-00".

4. Exit from PRG Mode.

Table of Contents