NEC UNIVERGE SV8100 Manual page 21

Plug & Play Mode (2)
Plug & Play Mode (2)
Plug & Play Mode (w/ DHCP Mode)
Plug & Play Mode (w/ DHCP Mode)
• PRG 10-13-01 : DHCP Server Mode
[Config]
[1] Network Settings
[2] SIP Setting
[3] Maintenance Settings
↓
Cancel
© 2009 by NEC Taiwan
Assign "1 : DHCP On" mode. (Default : 0 <DHCP Off>)
Make sure the other DHCP Server is not activated on the same net
Make sure the other DHCP Server is not activated on the same net
in case DHCP Server on SV8100 is activated. in case DHCP Server on SV8100 is activated.
Dial 1
1/2 [Network Settings]
[1] DHCP Mode
[2] IP Address
[3] Default Gateway
Save
[Config]
[1] Network Settings
[2] SIP Setting
[3] Maintenance Settings
↑
IP Terminal will
automatically restart
Dial 1
1/2
↓
Exit
1/2
↓ Cancel
Save
work
work
[DHCP Mode]
[1] Disable
◎[2] Enable
↓
Cancel
Press OK & Exit
(Back to "Config" menu)
Press Save
Dial 2
1/1
OK