Device Config - Toshiba Portégé M200 User Manual

User's Manual

Device Config

Device Configuration
This option lets you set the device configuration.
All Devices
Setup by OS
Display
This tab lets you customize your computer's display settings for either the internal
LCD screen or for an external monitor.
Power On Display
Lets you set the display to be used when the computer is booted.
Auto-Selected
LCD+Analog RGB
System LCD Only
CPU
Dynamic CPU Frequency Mode
This option lets you choose from the following settings:
Dynamically Switchable
Always High
Always Low
7-2
BIOS sets all devices.
Operating system sets devices that it can control. (Default)
Selects an external monitor if one is connected. Other-
wise, it selects the internal LCD. (Default)
Selects both the internal LCD and external monitor for
simultaneous display.
Selects the internal LCD even if the external monitor is
connected.
CPU power consumption and clock speed
automatic switching function is enabled.
When the computer is in use, CPU operation
is automatically switched when necessary.
(Default)
CPU power consumption and clock speed
automatic switching function is disabled. The
CPU always runs at its fastest speed.
CPU power consumption and clock speed
automatic switching function is disabled. The
CPU always runs at low power consumption
and low speed.