Bluetooth; Real Time Clock - Toshiba Portégé M200 User Manual

User's Manual

Bluetooth

For more information on wireless communication, refer to Chapter 4,
Basics.
Problem
Cannot access
Bluetooth device

Real Time Clock

Problem
The following message
is displayed on the LCD: time in BIOS setup with the following steps:
RTC battery is low or
CMOS checksum is
inconsistent. Press
[F1] key to set
Date/Time.
9-20
Procedure
Make sure the computer's wireless
communication switch is set to on.
Make sure the Bluetooth Manager is running and
the power to the Bluetooth device is turned on.
Make sure no optional Bluetooth PC card is
installed in the computer. The built-in Bluetooth
function and an optional Bluetooth PC card
cannot operate simultaneously.
If problems persist, contact your dealer.
Procedure
The battery for RTC is wearing. Set the date and
1. Press [F1] key. BIOS setup will boot up.
2. Set the date in [System Date].
3. Set the time in [System Time].
4. Press [End] key.
Confirmation message will appear.
5. Press [Y] key. BIOS setup will terminate and
the computer will be rebooted.
Operating