Turning on the power
This section describes how to turn on the power.
NOTE: After you turn on the power for the first time, do not turn it off
until you have set up the operating system. Refer to the section
up for the first time
1. If the external diskette drive is connected, make sure it is empty. If a diskette is
in the drive, press the eject button and remove the diskette.
2. Open the display panel.
3. Slide the power button lock toward the up of the computer to unlock the
button, then slide the button toward the right.
P
OWER BUTTON LOCK
in this chapter.
Figure 3-6 Turning on the power
Turning on the power
Starting
P
OWER BUTTON
3-9