Network Boot Protocol
This feature sets the protocol to remotely boot from the network.
[PXE]
[RPL]
NOTES: 1. PC card HDD boot is supported only by the PC card slot
on the computer. Support is guaranteed only for TOSHIBA
PC card HDDs.
2. When you assign a PC card HDD top priority, "PC" is not
displayed. However, the PC card HDD takes the position of
HDD in the Boot Priority Options list above.
Keyboard
Wake-up on Keyboard
When this feature is enabled and the computer is in Standby mode, you can turn on
the computer by pressing any key. It is effective only for the internal keyboard and
only when the computer is in Standby mode.
Enabled
Disabled
USB
USB KB/Mouse Legacy Emulation
Use this option to enable or disable USB KB/Mouse Legacy Emulation. If your
operating system does not support USB, you can still use a USB mouse and
keyboard by setting the USB KB/Mouse Legacy Emulation item to
Enabled.
Enabled
Disabled
Sets PXE as the protocol. (Default)
Sets RPL as the protocol.
Enables the Wake-up on Keyboard.
Disables the Wake-up on Keyboard. (Default)
Enables the USB KB/Mouse Legacy Emulation. (Default)
Disables the USB KB/Mouse Legacy Emulation.
HW Setup
7-5