Delay Start - Miele PWM 507 Hygiene Operating And Installation Instructions

The Delay start function can be used to
set the time until the programme starts
or the programme finish time (see
"Supervisor level - Delay start").
Selecting Delay start
 Touch the Further
selections  sensor.
 Select the
Finish at
 option.
Start in
 Use the  and  sensors to enter the
hours and minutes and confirm your
entry with the OK sensor.
The minutes entry moves to the next
"full quarter of an hour" and can then
be adjusted in 15-minute increments.
Starting Delay start
 Touch the Start/Stop sensor.
The door will lock and the time
remaining until the programme starts
will appear in the display.
, Start at  or
Cancelling or changing Delay
start
 Touch the Start/Stop sensor.
The following will appear in the display:
Add laundry
 Touch the
Start programme immediately
sensor.
The wash programmes starts
immediately.
or
 Touch the
Cancel programme
The programme start is cancelled and
the Start/Stop button flashes on and
off.

Delay start

Start programme
immediately
Cancel
programme
sensor.
31