Starting The Programme - The End Of The Programme - Miele PWM 507 Hygiene Operating And Installation Instructions

6. Starting the programme - the end of the programme

Payment system
If your machine is connected to a
payment system, the amount of
payment required will appear in the
display.
Do not cancel the programme once it
has started. Depending on the
settings, credit added in the payment
system may be lost when the
programme is cancelled.
Starting a programme
The programme can be started once
the Start/Stop sensor is flashing on and
off.
 Touch the Start/Stop sensor.
The door will lock ( symbol) and the
wash programme will start.
If a delay start time has been selected,
this will count down in the display until
the programme starts.
At the end of the delay start time or
immediately after the programme has
started, the programme duration will
appear in the display. The programme
sequence is also shown in the display.
Useful tip: Touch the  sensor control
to display the set temperature, spin
speed and any set Extras.
At the end of the programme
The door remains locked during the
anti-crease phase. However, the door
can be unlocked at any time by
touching the Start/Stop sensor.
Removing the laundry
 Pull open the door.
30
 Remove the laundry.
Items left in the drum could discolour
other items in the next wash or
become discoloured themselves.
Remove all items from the drum.
 Check the folds in the door seal for
any small articles, e.g. buttons, which
might be lodged there.
Useful tip: For safety reasons, close the
door when the washing machine is not
in use. Otherwise there is a danger of
objects being placed inadvertently in
the drum. If these remain unnoticed and
were washed in the next load, they
could damage the laundry. An open
door is also a danger to pets and
children.
 Switch the washing machine off with
the  button.
Useful tip: Leave the detergent
dispenser drawer slightly open to allow
it to dry.