Miele PWM 507 Hygiene Operating And Installation Instructions page 10

Warning and Safety instructions

If the electrical connection cable is faulty, it must only be replaced
by a Miele authorised service technician to protect the user from
danger.

The washing machine must be connected to the water supply
using the new hose set supplied with the appliance. Old hose sets
should not be re-used. Check the hose regularly for signs of wear.
Replace it in good time to avoid the risk of leaks and water damage.

Faulty components must only be replaced by genuine Miele
original spare parts. Miele can only guarantee the safety standards of
the machine when Miele replacement parts are used.

Do not connect the machine to the mains electricity supply by a
multi-socket adapter, extension lead or similar. These do not
guarantee the required safety of the machine (fire hazard due to the
risk of overheating).

The machine must not be installed and operated in mobile
locations (e.g. on a ship).

Please observe the instructions in "Installation" and "Technical
data".

If the washing machine is equipped with a mains plug, it must be
easily accessible after installation so that the machine can be
disconnected from the electricity supply if necessary.

If the appliance is hard wired, an on-site dual circuit breaker must
be accessible at all times in order to disconnect the washing
machine from the mains supply. The means of disconnection must
be incorporated in the fixed wiring in accordance with the wiring
rules.
10