Draught Regulator (Optional) - Immergas LUXOR Series Manual

13
The draught regulator (optional kit to be placed in the appliance
installation room), constantly compensates for possible draught
variations inside the chimney, as the outdoor atmospheric con-
ditions change.
Operation: when the negative pressure exceeds the desired
value (settable on the regulator in Pa), the draught regulator
flue adjusting device automatically opens and allows air to
enter the duct.
This dilutes the combustion products with consequent sta-
bilisation of the flue temperature, and generates a controlled
reduction of the draught until the desired value and preset on
the regulator is reached.
The installation of this kit is recommended on chimneys with
long sections (e.g. over 10 m) or with large diameters.
The draught regulator has a diameter of 150 mm; it is suitable
for chimneys with diameters varying from 150 to 300 mm.
18

DRAUGHT REGULATOR (OPTIONAL)

LUXOR
Manopola
Graduated knob
graduata