Setting Station Scanning Sensitivity; Storing Stations; Sensitivity For Short-Range Reception; Storing Stations Manually - Blaupunkt CD70 Operating Instructions Manual

You can set the sensitivity of short- and long-
range reception separately for AM and FM
reception.
Press the MENU button 8.
Press the soft key 4 with the display
allocation "TUN".
Press the soft key 4 with the display
allocation "S-LO".
buttons 7 to select
Use the
whether you want to set the sensitivity
for the AM or FM frequency range.
buttons 7 to adjust the
Use the /
sensitivity.
The display will show the current sensitivity
value. "LO 3" means maximum sensitivity for
short-range reception, while "LO 1" means
minimum sensitivity.
Press the OK button 5 to go up one
level in the menu or press the MENU
button 8 to exit the menu. The settings
are now stored.
Press the MENU button 8.
Press the soft key 4 with the display
allocation "TUN".
Press the soft key 4 with the display
allocation "S-DX".
buttons 7 to select
Use the
whether you want to set the sensitivity
for the AM or FM frequency range.
Press the /
sensitivity.
16
buttons to adjust the
The display will show the current sensitivity
value. "DX 3" means maximum sensitivity for
long-range reception, while "DX 1" means
minimum sensitivity.
Press the OK button 5 to go up one
level in the menu or press the MENU
button 8 to exit the menu. The settings
are now stored.
Select the desired FM memory bank
(FM1, FM2 FM3, FMT) or an AM mem-
ory bank (AM or AMT).
Tune to the desired station as described
in the section "Tuning to a station".
Hold down one of the six soft keys, un-
der which the station is to be stored, for
longer than two seconds.
You can automatically store the six strongest
stations in the region. These are stored in the
FMT or AMT memory bank.
Note:
Any stations previously stored in the memory
bank used will be deleted in the process.
To use the "Travelstore" function,
in radio mode, press the TUNE button
>.
The Radio Function menu will appear on the
display.
press the soft key 4 with the display
allocation "TS".
The "Travelstore" process will begin. "T-
STORE" will appear on the display. Once the
process is complete, the radio will be tuned
to the station stored in memory slot 1 of the
FMT or AMT memory bank.