Setting The Sensitivity Of The Station Search Mode; Storing Stations; Storing Stations Automatically (Travelstore); Listening To Preset Stations - Blaupunkt Casablanca CD51 Operating Instructions Manual

RADIO MODE
Setting the sensitivity of the
station search mode
You can configure the radio to only tune
into stations with a strong reception or
to also tune into those with a weak re-
ception.
Press the MENU button 8.
Keep pressing the
til "SENS" appears in the display.
button :.
Press the
The display shows the currently set val-
ue for sensitivity. "SENS HI" means that
the tuner is highly sensitive. "SENS LO"
means it is set to the lowest sensitivity
setting. If "SENS LO" is selected, "lo"
lights up in the display.
Set the required sensitivity using
buttons :.
the and
When you have finished making
your changes, press the MENU 8
or OK ; button.

Storing stations

Storing stations manually
Select the required memory, i.e.
FM1, FM2, FMT or the AM fre-
quency range.
Tune into the required station.
Press one of the station buttons 1 -
6 > for longer than two seconds
to store the station to that button.
12
: button un-
Storing stations automatically
(Travelstore)
You can automatically store the six sta-
tions with the strongest reception in the
region (only FM). The stations are stored
in the FMT memory.
Note:
Stations that were previously stored in
this memory are deleted in the process.
Keep the FM / TS button 5
pressed for longer than two sec-
onds.
The automatic station storing procedure
begins. "TRAVEL-STORE" appears in
the display. After the process is com-
pleted, the station stored in FMT mem-
ory location 1 will be played.

Listening to preset stations

Select the memory or the frequen-
cy range.
Press the preset station button 1 -
6 > of the station you want to lis-
ten to.
Scanning receivable stations
(SCAN)
You can briefly play all the receivable
stations. You can set the scanning time
to between 5 and 30 seconds in the
menu.
Starting SCAN
Keep the OK button ; pressed for
longer than two seconds.
Scanning begins. "SCAN" briefly ap-
pears in the display followed by a flash-
ing display of the current station name
or frequency.