Table of Contents
Advertisement
To select the FM or AM frequency range,
in radio mode, press the TUNE button
>.
The Radio Function menu will appear in the
display.
Press the soft key 4 with the display
allocation "FM" for the FM frequency
range.
Press the soft key 4 with the display
allocation "AM" for the AM frequency
range.
Press the TUNE button > or wait eight
seconds. The settings are now stored.
To move from one memory bank to the next
(FM1, FM2, FM3 or FMT or AM and AMT),
in radio mode, press the soft key 4
with the display allocation "NEXT" until
the desired memory bank appears on
the display.
There are various ways of tuning to a station.
Press the
or
The radio will be tuned to the next receivable
station.
You can also tune manually.
Press the
or
Note:
This function is available only when the RDS
function is inactive.
button 7.
button 7.
If a station provides multiple programmes,
then you can browse these so-called "broad-
casting networks".
Press the
or
the next station in the network."
Note:
In order to use this function, the RDS conve-
nience function must be activated.
This method can only be used to tune to sta-
tions that you have already listened to before.
To do this, use the scan or "travelstore" func-
tion.
You can choose whether tuning should be lim-
ited to local stations (short-range reception)
or also include distant stations (long-range
reception).
In radio mode, press the TUNE button
>.
The Radio Function menu will appear on the
display.
Press the soft key 4 with the display
allocation "NEXT".
The "second page" of the Radio Function
menu will appear on the display.
Press the soft key 4 with the display
allocation "LOC".
The current status "LOCAL" (short-range re-
ception) or "DISTANCE" (long-range recep-
tion) will appear briefly on the display. If the
"LOCAL" function is active, an arrow symbol
will appear next to "LOC".
press the TUNE button > or wait eight
seconds. The settings are now stored.
button 7 to switch to
15
Advertisement
Table of Contents
