Setting The Sensitivity Of Station Seek Tuning; Storing Stations; Storing Stations Automatically (Travelstore) - Blaupunkt Santa Cruz MP36 Operating Instructions Manual

Radio mode
Browsing through broadcasting
networks (FM only)
If a radio station provides several pro-
grammes, you have the option of browsing
through its so-called "broadcasting network".
Note:
The convenient RDS function must be
activated before you can use this fea-
ture.
Press the or
to the next station of the broadcasting
network.
Note:
When using this feature, you will only
be able to switch to stations that you
have received once before already. To
receive the stations, use the Scan or
Travelstore function.
Setting the sensitivity of station
seek tuning
You can choose whether the radio should
only tune into stations providing good re-
ception or whether it can also tune into
those with a weak reception.
Press the MENU button
Press the or
until "SENS" appears on the display.
The display shows the currently set sensitiv-
ity level. "SENS HI3" means that the tuner is
set to the highest sensitivity setting. "SENS
LO1" means it is set to the lowest sensitiv-
ity setting.
Set the desired sensitivity level using
the or button
button to change
.
button repeatedly
.
When you have finished making your chang-
es,
press the MENU button
Note:
You can set different sensitivity levels
for FM and MW or LW (AM).

Storing stations

Storing stations manually
Select the desired memory bank (FM1,
FM2, FMT) or one of the wavebands
(MW or LW).
Tune into the desired station.
Press and hold down one of the station
buttons 1 - 6 for longer than two sec-
onds to assign the station to that but-
ton.
Storing stations automatically
(Travelstore)
You can automatically store the six stations
offering the strongest reception in the re-
gion (FM only). The stations are stored in
the FMT memory bank.
Note:
Any stations that were previously
stored in this memory bank are deleted
in the process.
Press and hold down the BND•TS but-
ton for longer than two seconds.
The storing procedure begins. "FM TSTORE"
appears on the display. After the process
has completed, the radio will play the sta-
tion that is stored in memory location 1 of
the FMT memory bank.
.