Safety - ABB SACE Emax E2.2 Installation, Operation And Maintenance Instructions For The Installer And The User

2 - Safety

Warnings
5 | © 2019 ABB | 1SDH001000R0002 - ECN000109166 - Rev. D
Figure 2
The following warnings must be respected:
• READ THE INSTRUCTIONS CAREFULLY BEFORE TRYING TO INSTALL, OPERATE OR REPAIR
THE CIRCUIT BREAKER.
• Store these instructions along with other documents for instruction, maintenance and installation, drawings
and descriptive notes on the circuit-breaker.
• Keep these documents available during the installation, operation and maintenance of the appliance. The
use of these instructions facilitates proper maintenance.
• Install the circuit-breaker within the limits of the project described in the instruction manual shipped with the
unit. These circuit-breakers are designed to operate with values of voltage and current within the limits of
plate ratings. Do not install this equipment in systems operating at nominal values exceeding these limits.
• Follow the safety procedures indicated by Your Company.
• Do not open any covers or doors, do not work on devices before removing power from all circuits, and
after making sure of that with a measuring instrument.
WARNING!
• detailed descriptions of standard procedures for installation, use, maintenance and principles for safe
operation are not included. It is important to note that this document contains safety and precaution
instructions, against certain methods (of installation, use and maintenance) that could cause harm to
personnel, damage devices, or make them unsafe.
• these warnings and alarms do not include all conceivable ways to make installation, use and maintenance
recommended by ABB or not, that may be made, or possible consequences and complications of each
conceivable way, nor shall ABB investigate all those ways.
• anyone using maintenance procedures or devices, recommended by ABB or not, must check thoroughly
that neither personal safety nor the safety devices are endangered by mode of installation, use, maintenance
or the instruments used. For more information, questions or specific problems contact your nearest ABB
representative.
• This manual is written for qualified personnel only and is not intended as a substitute for a proper course,
or experience about safety procedures for this device.
• for the products equipped with communication, the purchaser, the installer or the final customer is responsible
for applying all the IT safety measures necessary in order to prevent risks deriving from connection to
communication networks; such risks include, among other things, the use of the product by unauthorized
persons, alteration of its normal functionality, accessing and modifying the information.
• the purchaser, installer or end user is responsible for ensuring that notices and safety signs are posted and
that all access points and switching devices are locked securely when the switchgear is left unattended,
even momentarily.
• all the information contained in this document reflects the latest product information available at the time
of printing. We reserve the right to edit the document at any time and without notice
HAZARD
ACCIDENTAL CONTACT WITH LIVE
POINTS CAN CAUSE SHOCK, BURNS AND
RESULT IN DEATH.
Do not try to use the product in any way, before
having read this instruction manual
Emax E2.2-E4.2-E6.2 circuit-breakers | 2 - Safety
ABB | SACE Emax 2