ABB SACE Emax E2.2 Installation, Operation And Maintenance Instructions For The Installer And The User page 10

Identification of packaging Examine the state of the packaging and check that:
Packaging checks Examine the state of the material received and verify that:
Damage and Discrepancy
8 | © 2019 ABB | 1SDH001000R0002 - ECN000109166 - Rev. D
• The data on the packaging plate match the data of the order.
• The box is intact and perfectly closed.
Figure 3
Pos. Description
1 Short description of the circuit-breaker
2 Description of accessories
3 Commercial code
4 Confirmation number and location
5 Circuit-breaker serial number
6 Features of the circuit-breaker
• The circuit-breaker or the fixed part are consistent with the order.
• The circuit-breaker or the fixed part are completely intact.
IMPORTANT:
• If the material is to be stored, check it beforehand. For opening the packaging,
follow the procedures outlined in the section "Unpacking and handling - opening the
packages" on page 10
• In the case of any inconsistencies, report them within five days of reception. See the
paragraph "Damage and Discrepancy Report" in this chapter.
If there is any damage to the packaging upon receipt and / or inconsistencies between order and product
identification label or product please contact ABB. Damage to the packaging must be reported no later than
Report
seven days from receipt of the material.
NOTE: The notification must indicate the Packing List number.
1
SACE EMAX E2.2 N 1600
VERSION WITH ASSEMBLED ACCESSORIES
YO 24V AC-DC
6 FIXED
POL 4
TERMINALS
REAR HORIZONTAL TERMINALS
CODE
A.B.
8 0 1 5 6 4 4 6 4 0 1 1 8 3
FB.NR.
8 0 3 1 0 0 4 0 3 5
Designed by ABB SACE Division
Management operations | 1 - Transport and checking on receipt
ABB | SACE Emax 2
2
3
1SDA055987R1
4
1130055880 004100
5
BB44005099