Table of Contents
Advertisement
22 - ALTISET Remote Control
Description
The ALTISET Remote Control is an optional accessory. It can be used to adjust the Military
ALTITRACK mBar, to switch backlight ON/OFF and to set the backlight intensity, either at the
same time or individually.
To transmit the commands, the ALTISET must be in line of sight and within 30 cm/10 inches of
the IrDA transceiver.
Fig. 39 - ALTISET front view
Fig. 40 - ALTISET rear view
1. "Linked" flashing LED when IrDA is searching for Military ALTITRACK
2. OLED displaying data for transmission to Military ALTITRACK
3. Left button
4. Mode button
5. Right button
6. IrDA port
7. Reset
8. Battery compartment
22.1 ALTISET Road Map
It is recommended that you familiarize yourself with the ALTISET ROAD MAP which is a very
helpful tool when using the ALTISET for the first time. See paragraph 22.2
40
Advertisement
Table of Contents
