Table of Contents
Advertisement
Main Setup Display - Turn the Military ALTITRACK OFF - Delete Jump - Set total number of
jumps - Set total freefall time - Set current date - Set current time - Delete logbook - MPH / KMH -
Feet / Meter - (TAS) True Airspeed / (SAS) Skydiver's Airspeed - Canopy log Enable / Disable -
Dive Type - Celsius / Fahrenheit - Beep ON / OFF
10.12 Dive Type Selector
Press
again to select DIVE TYPE
Fig. 14 - Dive Type Selector
Description
This mode can be used to:
1. Store the Dive Type to be performed on the next jump
The selected Dive Type is displayed in the Logbook Screen #3
2. Change freefall sensitivity
Only when Dive Type is set to STu or SLO. See below.
("DIVE TYPE" flashes)
Press
Press
to scroll forward through the Dive Type list
Press
to scroll backward through the Dive Type list
Press
to store your selection before moving to another menu
Dive Types:
0 = (factory default)
1 = 1 (User selectable in JUMP-TRACK)
2 = 2 (User selectable in JUMP-TRACK)
AFF = (Accelerated Free Fall)
TAn = (Tandem)
STu = (Student)*
PHO = (Photo)
4 = (4-way)
8 = (8-way)
FrE = (Freestyle)
SLO = (Slow) **
* Dive Type, STu (Student). In STu the descent rate parameters are changed to allow detection
of short freefalls, (2 sec).
** Dive Type, SLO (Slow). In SLO the exit fallrate and deployment calculation parameters are
changed to fit very slow falling types of dives, like wing suit dives, etc.
26
Advertisement
Table of Contents
