Configure Remote Configuration Via Sms - INSYS GSM 4.3 I4 Manual

INSYS GSM 4.3 I4
11.22

Configure Remote Configuration via SMS

You are able to send the extended INSYS AT** commands to the INSYS GSM 4.3 I4 via SMS
as well.
The commands sent via SMS will be executed as soon as the INSYS GSM 4.3 I4 is in com-
mand mode.

If selective call acceptance is enabled, commands, which are sent from mo-
bile phones with a phone number, which is not entered in the CLIP list, are
rejected.
Configuration with HSComm
In order to enable the remote configuration via SMS, activate on the "Basic
Settings" tab on the "GSM Connection" panel the check box "automatic SMS
processing".
You can configure a password, which is queried after changing into remote
configuration mode. In order to enable the password, click on the "Access
Control" tab on the "Password for" panel on the "set password" button under
"remote configuration, control by SMS". Enter the password into the "new
Password:" field and again in the "confirm Password:" field and click the "OK"
button.
In order to change the password, click on the "Access Control" tab on the
"Password for" panel on the "set password" button under "remote configura-
tion, control by SMS". Enter the old password into the "old Password:" field
and the new password into the "new Password:" field and again in the "con-
firm Password:" field and click the "OK" button. If you do not enter a new
password, the password will be disabled.
Configuration with AT commands
In order to enable automatic SMS processing,
use the command
In order to enable automatic SMS processing
and keep SMS not intended for the INSYS GSM
4.3 I4 in the memory, use the command
In order to disable automatic SMS processing,
use the command
In order to set the password, use the com-
mand
Replace <newPW> with the password and with
the repetition of the password.
AT**SMSRX=1
AT**SMSRX=2
AT**SMSRX=0
AT**PASSC=<newPW>,<new
PW>
Functions
61