Password For The Admin Menu - Mobotix M26 Allround Series Manual

M26 Camera Manual: Operating the Camera
Camera tilted upwards: Drill
through rear drain hole
Camera tilted down-
wards: Drill through
front drain hole
94
Depending on the later tilt of the camera, drill through the front or rear drain hole of the
camera's weatherproof housing.
When cleaning the camera with a water jet, do not use high-pressure cleaners. The drain
holes should be sealed with adhesive tape during cleaning.

3.6.2 Password for the Admin Menu

Accessing the Administration Menu of the camera (Admin Menu softbutton) is only possible
after entering a user name and password.
Factory default user name is admin .
•
Factory default password is meinsm .
•
(Note that you need to change the password upon your first login – camera release V5.1.x
and higher.)
The Quick Installation assistant automatically appears when the Administration Menu is
accessed for the first time. It provides an easy method to adjust the basic camera settings to
the current application scenario. For security reasons, we highly recommend changing the
default administrator password after the camera has been properly configured.
Enter the user name and password exactly as shown above. Note that all entries are case-sen-
sitive.
Make sure that you store information on user names and passwords in a secure place.
If you lose the administrator password and cannot access the administration menu,
the password can only be reset at the factory. This service is subject to a fee!
TILT (UP)
TILT (DOWN)
Caution