Avalue Technology EMX-TGLP User Manual
  1. Manuals
  2. Brands
  3. Avalue Technology Manuals
  4. Motherboard
  5. EMX-TGLP
  6. User manual

Avalue Technology EMX-TGLP User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
EMX-TGLP
11th Gen Intel® Core™ SoC i7/i5/i3 & Celeron Processor Mini
ITX Motherboard
User's Manual
Ed – 29 October 2021
st
1
Part No. E2047MXTG00R

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EMX-TGLP and is the answer not in the manual?

Questions and answers

Related Manuals for Avalue Technology EMX-TGLP

Summary of Contents for Avalue Technology EMX-TGLP

  • Page 1 EMX-TGLP 11th Gen Intel® Core™ SoC i7/i5/i3 & Celeron Processor Mini ITX Motherboard User’s Manual Ed – 29 October 2021 Part No. E2047MXTG00R...
  • Page 2 Disclaimer Avalue Technology Inc. reserves the right to make changes, without notice, to any product, including circuits and/or software described or contained in this manual in order to improve design and/or performance. Avalue Technology assumes no responsibility or liability for the...
  • Page 3 Applications that are described in this manual are for illustration purposes only. Avalue Technology Inc. makes no representation or warranty that such application will be suitable for the specified use without further testing or modification.
  • Page 4 A product returned without proof of the purchase date is not eligible for warranty service. Write the RMA number visibly on the outside of the package and ship it prepaid to your dealer. 4 EMX-TGLP User’s Manual...

  • Page 5: Table Of Contents

    2.3.20 SPI connector (JSPI1) ........................29 2.3.21 Battery connector (BT1) ........................ 30 2.3.22 Audio connector (JFAUD1) ......................30 2.3.23 EC Debug (JEC_SPI) ........................31 2.3.24 Miscellaneous setting connector 1 (JFPT1) .................. 31 2.3.25 Miscellaneous setting connector 2 (FPT2) ..................32 EMX-TGLP User’s Manual...
  • Page 6 S5 RTC Wake Settings ......................50 3.6.2.10 Serial Port Console Redirection .................... 51 3.6.2.10.1 Legacy Console Redirection Settings ................... 52 3.6.2.11 USB Configuration ......................... 52 3.6.2.12 Network Stack Configuration ....................53 3.6.2.13 NVMe Configuration ......................54 3.6.3 Chipset ............................54 6 EMX-TGLP User’s Manual...
  • Page 7 Install LAN Driver ....................76 Install RST for RAID Driver ..................78 Ascending Network Adapter ..................79 5. Mechanical Drawing ....................81 This is 4LAN4DP (Full height) version..............82 This is 2LAN2DP (Thin) version................83 EMX-TGLP User’s Manual...

  • Page 8: Getting Started

    1.2 Packing List Before you begin installing your single board, please make sure that the following materials have been shipped: 1 x EMX-TGLP motherboard  1 x SATA cable  1 x SATA power cable ...

  • Page 9: Document Amendment History

    User’s Manual 1.3 Document Amendment History Revision Date Comment February 2021 Avalue Initial Release EMX-TGLP User’s Manual...

  • Page 10: Manual Objectives

    We strongly recommend that you study this manual carefully before attempting to set up EMX-TGLP or change the standard configurations. Whilst all the necessary information is available in this manual we would recommend that unless you are confident, you contact your supplier for guidance.

  • Page 11: System Specifications

    *1: Where there is no LAN4, 2nd PCI-e functionable (By BOM)；When support PCI-e x2 function, need request ME setting. *2 : SATA 2 share with M.2 key B SATA Only supports one SIM card Does not support I2S and PCM functions EMX-TGLP User’s Manual 11...
  • Page 12 1 x 1 x 3 pin pitch 2.54mm connector for AT/ATX jumper Clear CMOS 1 x 3 pin, pitch 2.00mm connector for CMOS clear LVDS 1 x 2 x 20 pin, pitch 1.25mm connector for LVDS 12 EMX-TGLP User’s Manual...
  • Page 13 Realtek ALC897 co-lay ALC888S & Tempo 92HD73 (Default: Tempo 92HD73) Amplifier TI TPA3113D2PWP Stereo Class-D 6W x 2 Audio Amplifier Ethernet 1 x Intel® I225IT 2.5 Gigabit Ethernet (LAN2) LAN Chipset 1 x Intel® I219LM Gigabit Ethernet PHY (LAN1) EMX-TGLP User’s Manual 13...
  • Page 14 7sec, 4 LAN around 28sec.  When remove device M.2 KeyE (Intel® Wireless-AC 9560) from EMX-TGLP motherboard, OS Device Manager will still show this on device item with exclamation mark「 ! 」(Code 10). It has to power off DC-In and reboot. (With system product, please request dedicated AE for OEM BIOS to enable, or customer can Enable from BIOS menu) ...

  • Page 15: Architecture Overview-Block Diagram

    User’s Manual 1.6 Architecture Overview—Block Diagram The following block diagram shows the architecture and main components of EMX-TGLP. EMX-TGLP User’s Manual 15...

  • Page 16: Hardware Configuration

    EMX-TGLP User’s Manual 2. Hardware Configuration 16 EMX-TGLP User’s Manual...

  • Page 17: Product Overview

    User’s Manual 2.1 Product Overview EMX-TGLP User’s Manual 17...

  • Page 18: Jumper And Connector List

    Miscellaneous setting connector 1 5 x 2 header, pitch 2.54mm FPT2 Miscellaneous setting connector 2 5 x 2 header, pitch 2.54mm SODIMM1/2 206-pin DDR4 SO-DIMM socket 6 x 2 header, pitch 2.00mm JFAUD1 Front Audio connector 18 EMX-TGLP User’s Manual...
  • Page 19 4 x 1 wafer, pitch 2.54mm SPWR1 SATA Power connector 1 USIM1 USIM card slot 4 x 1 wafer, pitch 2.54mm CPU_FAN1 CPU fan connector By OEM request. Due to poor PCle connector compatibility concern, remove PCIEX4_1 this connector. EMX-TGLP User’s Manual 19...

  • Page 20: Setting Jumpers & Connectors

    EMX-TGLP User’s Manual 2.3 Setting Jumpers & Connectors 2.3.1 Serial port 1/2 pin9 signal select (JRI1/JRI2) JRI1 Ring* JRI2 +12V * Default 2.3.2 LVDS Back Light power selection (JSBKL1) PWM Mode* DC Mode * Default 20 EMX-TGLP User’s Manual...

  • Page 21: At/Atx Power Mode Select (Jsatx1)

    User’s Manual 2.3.3 AT/ATX Power Mode Select (JSATX1) ATX* * Default 2.3.4 M2KB1 Voltage setting (JP1) +3.8V +3.3V* * Default EMX-TGLP User’s Manual 21...

  • Page 22: Clear Cmos (Jbat1)

    EMX-TGLP User’s Manual 2.3.5 Clear CMOS (JBAT1) Protect* Clear CMOS * Default 2.3.6 LCD Inverter connector (JBKL1) Signal +12V LVDS_BKLT_EN LVDS_BKLTCTL 22 EMX-TGLP User’s Manual...

  • Page 23: Lcd Inverter Connector (Jbkl2)

    LVDS_DATA0_N 12 11 LVDS_DATA1_N LVDS_DATA2_P 16 15 LVDS_DATA3_P LVDS_DATA2_N 18 17 LVDS_DATA3_N LVDS_DATA4_P 22 21 LVDS_DATA5_P LVDS_DATA4_N 24 23 LVDS_DATA5_N LVDS_DATA6_P 28 27 LVDS_DATA7_P LVDS_DATA6_N 30 29 LVDS_DATA7_N LVDS_CLK1_P LVDS_CLK2_P LVDS_ CLK1_N LVDS_ CLK2_N +V12S_LVDS +V12S_LVDS EMX-TGLP User’s Manual 23...

  • Page 24: Edp_Panel Connector (Edp1)

    PIN PIN Signal EDP_PANEL_TXN0 EDP_PANEL_TXN3 EDP_PANEL_TXP0 EDP_PANEL_TXP3 EDP_PANEL_TXN1 EDP_PANEL_TXP1 11 EDP_PANEL_AUXN EDP_PANEL_AUXP EDP_PANEL_TXN2 15 EDP_PANEL_TXP2 17 EDP_PANEL_HPD +V35_EDP +V35_EDP 2.3.10 General purpose I/O connector (DIO1) Signal PIN PIN Signal SMB_SCL_S0_3P3EXT 17 18 SMB_SDA_S0_3P3EXT (Max current = 0.5A) 24 EMX-TGLP User’s Manual...

  • Page 25: Serial Port1 Connector (Jcom1)

    User’s Manual 2.3.11 Serial port1 connector (JCOM1) Signal PIN PIN Signal COM_DCD#_1 COM_RXD_1 COM_TXD_1 COM_DTR#_1 COM_DSR#_1 COM_RTS#_1 COM_CTS#_1 COM_RI#_1 2.3.12 Serial port2 connector (JCOM2) Signal PIN PIN Signal COM_DCD#_2 COM_RXD_2 COM_TXD_2 COM_DTR#_2 COM_DSR#_2 COM_RTS#_2 COM_CTS#_2 COM_RI#_2 EMX-TGLP User’s Manual 25...

  • Page 26: Serial Port 3/4/5/6 Connector (Jcom3/4/5/6)

    COM_RXD_5 COM_DCD#_5 COM_RI#_4 COM_CTS#_4 COM_RTS#_4 COM_DSR#_4 COM_DTR#_4 COM_TXD_4 COM_RXD_4 COM_DCD#_4 COM_RI#_3 COM_CTS#_3 COM_RTS#_3 COM_DSR#_3 COM_DTR#_3 COM_TXD_3 COM_RXD_3 COM_DCD#_3 2.3.14 Serial Port 1/2 RS485/422 Mode connector (JRS485_1/2) JRS485_2 JRS485_1 Signal PIN PIN Signal 485_422TX- 422RX- 485_422TX+ 422RX+ 26 EMX-TGLP User’s Manual...

  • Page 27: Sata Power Connector 1 (Spwr1)

    User’s Manual 2.3.15 SATA Power connector 1 (SPWR1) Signal +V5S_SATA +V12S_SATA 2.3.16 Power connector (PWR1) Signal Signal +VIN +VIN EMX-TGLP User’s Manual 27...

  • Page 28: Usb Connector 3 (Jusb3)

    EMX-TGLP User’s Manual 2.3.17 USB connector 3 (JUSB3) Signal Signal +V5A_USB56 +V5A_USB56 USB_DN5 USB_DN6 USB_DP5 USB_DP6 2.3.18 USB connector 4 (JUSB4) Signal Signal +V5A_USB78 +V5A_USB78 USB_DN7 USB2_ DN8 USB_DP7 USB2_ DP8 28 EMX-TGLP User’s Manual...

  • Page 29: Speaker Connector (Spk1)

    User’s Manual 2.3.19 Speaker connector (SPK1) Signal SPK_L+ SPK_L- SPK_R+ SPK_R- 2.3.20 SPI connector (JSPI1) Signal PIN PIN Signal +V3.3A_1.8A_SPI SPI0_CS0# SPI0_BIOS_CLK SPI0_BIOS_MISO SPI0_BIOS_MOSI BIOS_HOLD# BIOS_WP# EMX-TGLP User’s Manual 29...

  • Page 30: Battery Connector (Bt1)

    EMX-TGLP User’s Manual 2.3.21 Battery connector (BT1) Signal +RTCBAT 2.3.22 Audio connector (JFAUD1) Signal PIN PIN Signal LINEOUT_R LINEOUT_L GND_AUD GND_AUD LINEIN_R LINEIN_L MICIN_R MICIN_L LINEOUT1_JD LINE1-JD MIC1_JD GND_AUD 30 EMX-TGLP User’s Manual...

  • Page 31: Ec Debug (Jec_Spi)

    User’s Manual 2.3.23 EC Debug (JEC_SPI) Signal PIN PIN Signal +V3.3A_EC EC_FSCE# EC_FSCK EC_FMISO EC_FMOSI EC_HOLD# EC_SMCLK_DEBUG 10 EC_SMDAT_DEBUG 2.3.24 Miscellaneous setting connector 1 (JFPT1) Signal PIN PIN Signal -PWR_BNT -Reset +PWR_BNT +Reset -PWR_LED -HD_LED +PWR_LED +HD_LED EMX-TGLP User’s Manual 31...

  • Page 32: Miscellaneous Setting Connector 2 (Fpt2)

    EMX-TGLP User’s Manual 2.3.25 Miscellaneous setting connector 2 (FPT2) Signal PIN PIN Signal Speaker- BLK_DN BLK_UP BLK_VR(10K) Speaker+ 2.3.26 LPC connector (JLPC1) Signal PIN PIN Signal LPC_AD0 +3.3V LPC_AD1 PLT_BUF_RST# LPC_AD2 LPC_LFRAME# LPC_AD3 CLK_24M_80 LPC_SERIRQ 32 EMX-TGLP User’s Manual...

  • Page 33: Cpu Fan Connector (Cpu_Fan1)

    User’s Manual 2.3.27 CPU fan connector (CPU_FAN1) Signal +12V CPU_FANIN FAN_PWM0 EMX-TGLP User’s Manual 33...

  • Page 34: Bios Setup

    EMX-TGLP User’s Manual 3.BIOS Setup 34 EMX-TGLP User’s Manual...

  • Page 35: Introduction

    If you do not press the keys at the correct time and the system does not boot, an error message will be displayed and you will again be asked to. Press F1 to Continue, DEL to enter SETUP EMX-TGLP User’s Manual 35...

  • Page 36: Using Setup

    Note: Some of the navigation keys differ from one screen to another.  To Display a Sub Menu Use the arrow keys to move the cursor to the sub menu you want. Then press <Enter>. A “” pointer marks all sub menus. 36 EMX-TGLP User’s Manual...

  • Page 37: Getting Help

    BIOS Vendor and your systems manufacturer to provide the absolute maximum performance and reliability. Even a seemingly small change to the chipset setup has the potential for causing you to use the override. EMX-TGLP User’s Manual 37...

  • Page 38: Bios Setup

    <Enter> to accept and enter the sub-menu. 3.6.1 Main Menu This section allows you to record some basic hardware configurations in your computer and set the system clock. 3.6.1.1 TDP-28W BIOS 38 EMX-TGLP User’s Manual...

  • Page 39: Tdp-15W Bios

    User’s Manual 3.6.1.2 TDP-15W BIOS 3.6.1.3 System Language This option allows choosing the system default language. 3.6.1.4 System Date Use the system date option to set the system date. Manually enter the day, month and year. EMX-TGLP User’s Manual 39...

  • Page 40: System Time

    Visit the Avalue website (www.avalue.com.tw) to download the latest product and BIOS information. 3.6.2 Advanced Menu This section allows you to configure your CPU and other system devices for basic operation through the following sub-menus. 40 EMX-TGLP User’s Manual...

  • Page 41: Connectivity Configuration

    Disable Integrated[Default] enabled by default. Otherwise Integrated CNVi Mode Auto Detection solution (CNVi) will be enabled; [Disable Integrated] disables Integrated Solution. NOTE: When CNVi is present, the GPIO pins that are used for radio 3.6.2.2 CPU Configuration EMX-TGLP User’s Manual 41...

  • Page 42: Power & Performance

    When enabled, a VMM can utilize the additional Disabled Virtualization hardware capabilities provided by Vanderpool Enabled[Default], Technology Technology. All[Default], Number of cores to enable in each processor Active Processor Cores package. 3.6.2.3 Power & Performance 3.6.2.3.1 CPU - Power Management Control (TDP-28W BIOS) 42 EMX-TGLP User’s Manual...

  • Page 43: Cpu - Power Management Control (Tdp-15W Bios)

    Enable/Disable CPU Power Management. Allows C states Enabled[Default], CPU to go to C states when it's not 100% utilized. Disabled Enable/Disable C1E. When enabled, CPU will switch Enhanced C-states Enabled[Default], to minimum speed when all cores enter C-State. EMX-TGLP User’s Manual 43...

  • Page 44: Pch-Fw Configuration

    EMX-TGLP User’s Manual 3.6.2.4 PCH-FW Configuration 3.6.2.4.1 Firmware Update Configuration Item Options Description Disabled[Default], Enable/Disable Me FW Image Re-Flash Me FW Image Re-Flash Enabled function. 44 EMX-TGLP User’s Manual...

  • Page 45: Trusted Computing

    O.S. will not show Security Device. Security Device Support Enabled[Default], TCG EFI protocol and INT1A interface will not be available. 3.6.2.6 ACPI Settings Item Options Description Disabled Enables or Disables System ability to Enable Hibernation Enabled[Default], Hibernate (OS/S4 Sleep State). This EMX-TGLP User’s Manual 45...

  • Page 46: It8528 Super Io Configuration

    Set Parameters of Serial Port 3 (COMC). Serial Port 4 Configuration Set Parameters of Serial Port 4 (COMD). Serial Port 5 Configuration Set Parameters of Serial Port 5 (COME). Serial Port 6 Configuration Set Parameters of Serial Port 6 (COMF). 46 EMX-TGLP User’s Manual...

  • Page 47: Serial Port 1 Configuration

    3.6.2.7.1 Serial Port 1 Configuration Item Option Description Disabled Serial Port Enable or Disable Serial Port (COM). Enabled[Default], UART 232[Default], UART 232 422 485 UART 422, Change the Serial Port as RS232/422/485. UART 485 3.6.2.7.2 Serial Port 2 Configuration EMX-TGLP User’s Manual 47...

  • Page 48: Serial Port 3 Configuration

    UART 232 422 485 UART 422, Change the Serial Port as RS232/422/485. UART 485 3.6.2.7.3 Serial Port 3 Configuration Item Option Description Enabled[Default], Serial Port Enable or Disable Serial Port (COM). Disabled 3.6.2.7.4 Serial Port 4 Configuration 48 EMX-TGLP User’s Manual...

  • Page 49: Serial Port 5 Configuration

    Item Option Description Enabled[Default], Serial Port Enable or Disable Serial Port (COM). Disabled 3.6.2.7.5 Serial Port 5 Configuration Item Option Description Enabled[Default], Enable or Disable Serial Port Serial Port Disabled (COM). 3.6.2.7.6 Serial Port 6 Configuration EMX-TGLP User’s Manual 49...

  • Page 50: Ec 8528 H/W Monitor

    Item Option Description Enabled[Default], Enable or Disable Serial Port Serial Port Disabled (COM). 3.6.2.8 EC 8528 H/W monitor Item Options Description Disabled[Default], Smart Fan Function Enable or Disable Smart Fan. Enabled 3.6.2.9 S5 RTC Wake Settings 50 EMX-TGLP User’s Manual...

  • Page 51: Serial Port Console Redirection

    System will wake on the current time + Increase minutes(s). 3.6.2.10 Serial Port Console Redirection Item Options Description Disabled[Default], Console Redirection Console Redirection Enable or Disable. Enabled Disabled[Default], Console Redirection EMS Console Redirection Enable or Disable. Enabled EMX-TGLP User’s Manual 51...

  • Page 52: Legacy Console Redirection Settings

    Legacy OS and Legacy OPROM Messages 3.6.2.11 USB Configuration The USB Configuration menu helps read USB information and configures USB settings. Item Options Description 1 sec The time-out value for Control, Bulk, and Interrupt USB transfer time-out 5 sec transfers. 52 EMX-TGLP User’s Manual...

  • Page 53: Network Stack Configuration

    Optical drives are emulated as ‘CDROM’, Mass Storage Devices Forced FDD Hard Disk drives with no media will be emulated according CD-ROM to a drive type. 3.6.2.12 Network Stack Configuration Item Options Description Enabled Network Stack Enable/Disable UEFI Network Stack. Disabled[Default] EMX-TGLP User’s Manual 53...

  • Page 54: Nvme Configuration

    EMX-TGLP User’s Manual 3.6.2.13 NVMe Configuration 3.6.3 Chipset 54 EMX-TGLP User’s Manual...

  • Page 55: System Agent (Sa) Configuration

    User’s Manual 3.6.3.1 System Agent (SA) Configuration Item Option Description Disabled VT-d VT-d capability. Enabled[Default] 3.6.3.1.1 Memory Configuration EMX-TGLP User’s Manual 55...

  • Page 56: Graphics Configuration

    Description Select which of IGFX/PEG/PCI Graphics Auto[Default] Primary Display device should be Primary Display Or select IGFX HG for Hybrid Gfx. 3.6.3.1.3 VMD Configuration Item Option Description Disabled[Default] Enable VMD controller Enable/Disable to VMD controller Enabled 56 EMX-TGLP User’s Manual...

  • Page 57: Pch-Io Configuration

    User’s Manual 3.6.3.2 PCH-IO Configuration Item Option Description Enabled[Default] PCH LAN Controller Enable/Disable onboard NIC. Disabled 3.6.3.2.1 PCI Express Configuration EMX-TGLP User’s Manual 57...
  • Page 58 L0s State AUTO – BIOS auto ASPM configure DISABLE – Disables ASPM. L0sL1 Auto Disabled L1 Substates L1.1 PCI Express L1 Substates settings. L1.1 & L1.2[Default], Auto[Default] Gen1 PCIe Speed Select PCIe speed. Gen2 Gen3 58 EMX-TGLP User’s Manual...
  • Page 59 L0s State AUTO – BIOS auto ASPM configure DISABLE – Disables ASPM. L0sL1 Auto Disabled L1 Substates L1.1 PCI Express L1 Substates settings. L1.1 & L1.2[Default], Auto[Default] Gen1 PCIe Speed Select PCIe speed. Gen2 Gen3 EMX-TGLP User’s Manual 59...
  • Page 60 L0s State AUTO – BIOS auto ASPM configure DISABLE – Disables ASPM. L0sL1 Auto Disabled L1 Substates L1.1 PCI Express L1 Substates settings. L1.1 & L1.2[Default], Auto[Default] Gen1 PCIe Speed Select PCIe speed. Gen2 Gen3 60 EMX-TGLP User’s Manual...
  • Page 61 L0s State AUTO – BIOS auto ASPM configure DISABLE – Disables ASPM. L0sL1 Auto Disabled L1 Substates L1.1 PCI Express L1 Substates settings. L1.1 & L1.2[Default], Auto[Default] Gen1 PCIe Speed Select PCIe speed. Gen2 Gen3 EMX-TGLP User’s Manual 61...
  • Page 62 L0s State AUTO – BIOS auto ASPM configure DISABLE – Disables ASPM. L0sL1 Auto Disabled L1 Substates L1.1 PCI Express L1 Substates settings. L1.1 & L1.2[Default], Auto[Default] Gen1 PCIe Speed Select PCIe speed. Gen2 Gen3 62 EMX-TGLP User’s Manual...

  • Page 63: Sata And Rst Configuration

    3.6.3.2.2 SATA And RST Configuration Item Option Description Disabled SATA Controller(s) Enable/Disable SATA Device. Enabled[Default], Disabled Port 0 Enable or Disable SATA Port Enabled[Default], Disabled Port 1 Enable or Disable SATA Port Enabled[Default], 3.6.3.2.3 HD Audio Configuration EMX-TGLP User’s Manual 63...

  • Page 64: Board & Panel Configuration

    1366 x768 24/1 1920 x1080 24/2 1680 x1050 24/2 BIOS[Default] Panel Brightness Control BR Button Panel Brightness Control Method. 1.BIOS Method 2. Brightness Button 3. VR 4.OS Driver OS Driver Panel Brightness Select Panel back light PWM duty. 64 EMX-TGLP User’s Manual...
  • Page 65 10 min 30 min Disabled Enabled/Disabled USB Standby Power USB Standby Power Enabled[Default], during S3/S4/S5 2W[Default], Amplifier Gain Amplifier Gain USB3[Default], M.2 KeyB type M.2 KeyB type PCIE Disabled[Default], SHOW DMI INFO SHOW DMI INFO Enabled EMX-TGLP User’s Manual 65...

  • Page 66: Security

    EMX-TGLP User’s Manual 3.6.4 Security  Administrator Password Set setup Administrator Password  User Password Set User Password 66 EMX-TGLP User’s Manual...

  • Page 67: Secure Boot Menu

    System is in User mode. The mode change requires platform reset Secure Boot mode options: Standard or Custom. Standard[Default] In Custom mode, Secure Boot Policy variables Secure Boot Mode Custom can be configured by a physically present user without full authentication EMX-TGLP User’s Manual 67...

  • Page 68: Boot

    65535(0xFFFF) means indefinite waiting. On[Default] Bootup NumLock State Select the Keyboard NumLock state Disabled[Default] Enables or disables Quiet Boot option Quiet Boot Enabled Boot Option #1 Set the system boot order. Boot Option #2 Set the system boot order. 68 EMX-TGLP User’s Manual...

  • Page 69: Save And Exit

    User’s Manual 3.6.6 Save and exit 3.6.6.1 Save Changes and Reset Reset the system after saving the changes. 3.6.6.2 Discard Changes and Reset Reset system setup without saving any changes. EMX-TGLP User’s Manual 69...

  • Page 70: Restore Defaults

    EMX-TGLP User’s Manual 3.6.6.3 Restore Defaults Restore/Load Default values for all the setup options. 3.6.6.4 Launch EFI Shell from filesystem device Attempts to Launch EFI Shell application (Shell.efi) from one of the available filesystem devices. 70 EMX-TGLP User’s Manual...

  • Page 71: Drivers Installation

    User’s Manual 4. Drivers Installation Note: Installation procedures and screen shots in this section are for your reference and may not be exactly the same as shown on your screen. EMX-TGLP User’s Manual 71...

  • Page 72: Install Chipset Driver

    Windows 10 operation system. If the warning message appears while the installation process, click Continue to go on. Step 3. Click Install. Step1. Click Next. Step 4. Complete setup. Step 2. Click Accept. 72 EMX-TGLP User’s Manual...

  • Page 73: Install Vga Driver

    If the warning message appears while the installation process, click Continue to go on. Step 3. Click Start. Step 1. Click Begin installation. Step 4. Click Reboot now. Step 2. Click Next to accept license agreement. EMX-TGLP User’s Manual 73...

  • Page 74: Install Me Driver

    If the warning message appears while the installation process, click Continue to go on. Step 3. Click Next. Step 4. Click Finish to complete setup. Step 1. Click Next to continue setup. Step 2. Click Next. 74 EMX-TGLP User’s Manual...

  • Page 75: Install Audio Driver (For Realtek Alc897 And Alc888S Hd Audio)

    Windows 10 operation system. If the warning message appears while the installation process, click Continue to go on. Step1. Click Next to Install. Step 2. Click Finish to complete setup. EMX-TGLP User’s Manual 75...

  • Page 76: Install Lan Driver

    If the warning message appears while the installation process, click Continue to go on. Step 3. Click Next. Step 1. Click Next to continue installation. Step 4. Click Yes. Step 2. Click Next. Step 5. Click Install. 76 EMX-TGLP User’s Manual...
  • Page 77 User’s Manual Step 6. Click Finish to complete setup. EMX-TGLP User’s Manual 77...

  • Page 78: Install Rst For Raid Driver

    Windows 10 operation system. If the warning message appears while the installation process, click Continue to go on. Step 1. Click Next to continue installation. Step 2. Click Next. 78 EMX-TGLP User’s Manual...

  • Page 79: Ascending Network Adapter

    C:\ and execute the file Step 1. Copy file: Step 4. it will generate Avalue folder. “AscendingSortNetworkAdapterByMac.zip” to C:\ Step 5. Step 2. Unzip file: Click and enter C:\Avalue\EMX-TGLP folder , “AscendingSortNetworkAdapterByMac.zip” execute administratoramode “ExecuteAscendingSortNetworkAdaptersX64.bat”. EMX-TGLP User’s Manual 79...
  • Page 80 Restart. Step 7. Ethernet1=>INTEL I219LM Ethernet2=>INTEL I225IT Ethernet3=>INTEL I210 Ethernet4=>INTEL I210 Note: If customer would like to patch LAN order sequence, please refer to Avalue website for EMX-TGLP Sort Network Adapter By Mac Address. 80 EMX-TGLP User’s Manual...

  • Page 81: Mechanical Drawing

    User’s Manual 5. Mechanical Drawing EMX-TGLP User’s Manual 81...

  • Page 82: This Is 4Lan4Dp (Full Height) Version

    EMX-TGLP User’s Manual 5.1 This is 4LAN4DP (Full height) version. Unit: mm 82 EMX-TGLP User’s Manual...

  • Page 83: This Is 2Lan2Dp (Thin) Version

    User’s Manual 5.2 This is 2LAN2DP (Thin) version. Unit: mm EMX-TGLP User’s Manual 83...
  • Page 84 EMX-TGLP User’s Manual For thermal solutions:  Standard 4LAN4DP (Full height) motherboard BIOS default for TDP: 28W, CPU heatsink and screws are option parts.  Standard 2LAN2DP (Thin) motherboard BIOS default for TDP: 15W, heatsink and screws onboard. 84 EMX-TGLP User’s Manual...
  • Page 85 User’s Manual  If customer already has heatsink on hand and would like to upgrade thermal solution from heatsink (BIOS TDP: 15W) to CPU cooler (BIOS TDP: 28W), please refer to below. EMX-TGLP User’s Manual 85...

Table of Contents