Table of Contents
Advertisement
3.2
AMI BIOS Setup
The AMI BIOS ROM has a pre-installed Setup program that allows users to modify basic
system configurations. These configurations are stored in the battery-backed CMOS
RAM and BIOS NVRAM so the information is retained when power is turned off.
To enter BIOS Setup, turn on the system and immediately press <Del> or <ESC>.
The following BIOS menus and their functions are listed below.
Main: Set the date, use tab to switch between date elements.
Advanced: Enable/ disable boot options for legacy network devices.
Chipset: Host bridge parameters.
Security: Set setup administrator password.
Boot: Enable/ disable quiet boot option.
Save & Exit: Exit system setup after saving the changes.
Chapter 3 – AMI BIOS Setup
36
Advertisement
Table of Contents
