1. Manuals
  2. Brands
  3. Aaeon Manuals
  4. Motherboard
  5. PCM-LN05 Rev.B
  6. Manual

Aaeon PCM-LN05 Rev.B Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
S u b C o m p a c t B o a r d
P C M - L N 0 5 R e v . B
PCM-LN05 Rev.B
®
Intel
Atom™N455/D525 Processors
®
Intel
82567V & 82583V
for 10/100/1000Mbps
2 SATA 3.0 Gb/s, 1 CompactFlash™
6 COM, 7 USB2.0, Digital I/O
1 Mini Card/ SMBus/ LPC
PCM-LN05 Manual Rev.B 1st Ed.
July 2011

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PCM-LN05 Rev.B and is the answer not in the manual?

Questions and answers

Related Manuals for Aaeon PCM-LN05 Rev.B

Summary of Contents for Aaeon PCM-LN05 Rev.B

  • Page 1 S u b C o m p a c t B o a r d P C M - L N 0 5 R e v . B PCM-LN05 Rev.B ® Intel Atom™N455/D525 Processors ® Intel 82567V & 82583V for 10/100/1000Mbps 2 SATA 3.0 Gb/s, 1 CompactFlash™...

  • Page 2: Copyright Notice

    AAEON assumes no liabilities resulting from errors or omissions in this document, or from the use of the information contained herein. AAEON reserves the right to make changes in the product design without notice to its users.
  • Page 3 S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B Acknowledgments All other products’ name or trademarks are properties of their respective owners.

  • Page 4: Packing List

     CD-ROM for manual (in PDF format) and drivers  PCM-LN05 Rev.B with Active Cooler (D525 Version) or with Passive Cooler (N455 Version) If any of these items should be missing or damaged, please contact your distributor or sales representative immediately.

  • Page 5: Table Of Contents

    S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B Contents Chapter 1 General Information 1.1 Introduction..............1-2 1.2 Features ..............1-3 1.3 Specifications ............
  • Page 6 S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B 2.18 SATA Port #2 (CN5)..........2-13 2.19 SATA Port #1 (CN6)..........2-13 2.20 LPC Expansion I/F (CN7)........
  • Page 7 S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B 2.41 LVDS Inverter Connector (CN28) ......2-22 2.42 LVDS Output (CN29)..........2-22 2.43 USB Port 1 &...
  • Page 8 S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B Appendix C Mating Connector C.1 List of Mating Connectors and Cables....C-2...

  • Page 9: Chapter 1 General Information

    S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B Chapter General Information 1- 1 Chapter 1 General Information...

  • Page 10: Introduction

    1.1 Introduction AAEON, a leading embedded boards manufacturer, is pleased to announce a new 3.5” SubCompact Board—PCM-LN05 Rev.B. The PCM-LN05 Rev.B is a cutting-edge product that provides high performance and low power consumption in the embedded market. ® PCM-LN05 Rev.B adopts the latest Intel...

  • Page 11: Features

    S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B 1.2 Features ®  Intel Atom™ N455/D525 Processors Up To 1.8 GHz ®...

  • Page 12: Specifications

    S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B 1.3 Specifications System ®  Processor Intel Atom™ N455/D525 1.8GHz Processors ...
  • Page 13 S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B  Board Size 5.75”(L) x 4”(W) (146mm x 101.6mm)  Gross Weight 0.88 lb (0.4 kg) ...
  • Page 14 S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B  PS/2 Port Keyboard x 1, Mouse x 1  Digital I/O Supports 8-bit (Programmable) ...

  • Page 15: Chapter 2 Quick Installation Guide

    S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B Chapter Quick Installation Guide Chapter 2 Quick Installation Guide...

  • Page 16: Safety Precautions

    S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B 2.1 Safety Precautions Always completely disconnect the power cord from your board whenever you are working on it.

  • Page 17: Location Of Connectors & Jumpers

    S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B 2.2 Location of Connectors and Jumpers Component Side Chapter 2 Quick Installation Guide...

  • Page 18: Solder Side

    S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B Solder Side Chapter 2 Quick Installation Guide...

  • Page 19: Mechanical Drawing

    S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B 2.3 Mechanical Drawing Component Side Chapter 2 Quick Installation Guide...
  • Page 20 S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B Solder Side Chapter 2 Quick Installation Guide...

  • Page 21: List Of Jumpers

    S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B 2.4 List of Jumpers The board has a number of jumpers that allow you to configure your system to suit your application.

  • Page 22: List Of Connectors

    S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B 2.5 List of Connectors The board has a number of connectors that allow you to configure your system to suit your application.
  • Page 23 S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B CN21 COM Port #3 CN22 COM Port #2 CN23 Audio Line-In/Out and MIC Connector CN24 RJ-45 Ethernet #2 CN25...

  • Page 24: Setting Jumpers

    S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B 2.6 Setting Jumpers You configure your card to match the needs of your application by setting jumpers.

  • Page 25: Touch Screen 4/5/8-Wire Mode Selection (Jp1)

    S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B 2.7 Touch Screen 4/5/8-wire Mode Selection (JP1) Function 1-2 Closed 4/8-wire (Default) 1-2 Open 5-wire 2.8 Auto Power Button Selection (JP2)

  • Page 26: Lvds Operating Voltage Selection (Jp6)

    S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B 2.12 LVDS Operating Voltage Selection (JP6) Function +3.3V (Default) 2.13 LVDS Inverter Voltage Selection (JP7) Function +12V +5V (Default)

  • Page 27: External +5Vsb Input (Cn4)

    S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B PSON# +5 Volt. Standby 2.17 External +5VSB Input (CN4) Signal PSON# Ground +5V Standby 2.18 SATA Port # 2 (CN5)

  • Page 28: Lpc Expansion I/F (Cn7)

    S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B 2.20 LPC Expansion I/F (CN7) Signal LAD0 LAD1 LAD2 LAD3 +3.3 Volt. LFRAME# LRESET# Ground...

  • Page 29: Touch Screen Connector (Cn10)

    S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B 2.23 Touch Screen Connector (CN10) P i n 8 - w i r e 5 - w i r e 4 - w i r e Ground...

  • Page 30: Usb Port #7 (Cn14)

    S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B RTSF CTSF DTRF Ground 2.27 USB Port #7 (CN14) Signal +5V Standby Data6- Data6+ Ground...

  • Page 31: Usb Port #5 (Cn17)

    S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B 2.30 USB Port #5 (CN17) Signal +5V Standby Data4- Data4+ Ground Ground 2.31 COM Port #4 (CN18) S i g n a l...

  • Page 32: Com Port #3 (Cn21)

    S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B Data2+ Ground Ground 2.34 COM Port #3 (CN21) S i g n a l P i n S i g n a l DCDC...

  • Page 33: Audio Line-In/Out And Mic Connector (Cn23)

    S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B RS-485 Mode S i g n a l P i n S i g n a l TXD- TXD+...

  • Page 34: Ethernet #1 (Cn25)

    S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B SPD100_LED SPD1K_LED ACT_LED +3.3V 2.38 RJ-45 Ethernet #1 (CN25) S i g n a l P i n S i g n a l GPHY_MDIO0+...

  • Page 35: Parallel Port (Cn27)

    S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B Address(Register) BIOS Setting Connector F75111 GPIO Setting (I2C address) Definition Output Input Port 1 @6Eh Pin 1...

  • Page 36: Lvds Inverter Connector (Cn28)

    S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B 2.41 LVDS Inverter Connector (CN28) Signal +5V / +12V (1A) Brightness Control Ground Ground Backlight Enable (Controlled by CH7308C)

  • Page 37: Usb Port 1 & 2 (Cn30)

    S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B 2.43 USB Port 1 & 2 (CN30) P i n S i g n a l P i n S i g n a l +5V Standby...

  • Page 38: Sim Card Socket (Cn34)

    S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B +5 Volt. CRT_PLUG# DDCDATA HSYNC VSYNC DDCCLK 2.47 SIM Card Socket (CN34) Signal P i n S i g n a l...

  • Page 39: Mini-Card Slot #1 (Pcie1)

    S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B Ground IDERST# Ground PIORDY PDA2 PDA1 +3.3V PDA0 DASP# PDD0 PDIAG# PDD1 PDD8 PDD2...
  • Page 40 S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B PCIE_TXN1 SMBDATA PCIE_TXP1 Ground Ground USB_Data8- Ground USB_Data8+ +3.3V Standby Ground +3.3V Standby Ground +1.5V...
  • Page 41 S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B Below Table for China RoHS Requirements 产品中有毒有害物质或元素名称及含量 AAEON Main Board/ Daughter Board/ Backplane 有毒有害物质或元素 部件名称 铅...

  • Page 42: Chapter 3 Ami Bios Setup

    S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B Chapter BIOS Setup Chapter 3 AMI BIOS Setup 3-1...

  • Page 43: System Test And Initialization

    3. The CMOS memory has lost power and the configuration information has been erased. The PCM-LN05 Rev.B CMOS memory has an integral lithium battery backup for data retention. However, you will need to replace the complete unit when it finally runs down.

  • Page 44: Ami Bios Setup

    S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B 3.2 AMI BIOS Setup AMI BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration.

  • Page 45: Chapter 4 Driver Installation

    S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B Chapter Driver Installation 4 -1 Chapter 4 Driver Installation...
  • Page 46 S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B The PCM-LN05 Rev.B comes with an AutoRun CD-ROM that contains all drivers and utilities that can help you to install the driver automatically.
  • Page 47 G E N E - L N 0 5 R e v . B 4.1 Installation: Insert the PCM-LN05 Rev.B CD-ROM into the CD-ROM drive. And install the drivers from Step 1 to Step 7 in order. Step 1 – Install Chipset Driver 1.
  • Page 48 S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B Step 4 –Install Audio Driver 1. Click on the STEP4-AUDIO folder and select the OS folder your system is 2.

  • Page 49: Appendix A Programming The Watchdog Timer

    S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B Appendix Programming the Watchdog Timer Appendix A Programming the Watchdog Timer...

  • Page 50: Programming

    PCM-LN05 Rev.B utilizes W83627DHG-P chipset as its watchdog timer controller. Below are the procedures to complete its configuration and the AAEON intial watchdog timer program is also attached based on which you can develop customized program to fit your application. Configuring Sequence Description...
  • Page 51 S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B (3) Exit the W83627DHG config Mode. Undesired result may occur if the config Mode is not exited normally. (1) Enter the W83627DHG config Mode To enter the W83627DHG config Mode, two special I/O write operations are to be performed during Wait for Key state.
  • Page 52 S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B = 010 Power LED pin is driven low. = 011 Power LED pin outputs 2Hz pulse with 50% duty cycle.
  • Page 53 S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B WatchDog Timer Register II (Index=F6h, Default=00h) Bit 7-0 = 0 x 00 Time-out Disable = 0 x 01 Time-out occurs after 1 second/minute = 0 x 02 Time-out occurs after 2...
  • Page 54 S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B Force Watchdog Timer time-out event: this bit is self-clearing Bit 4 : Watchdog Timer Status.

  • Page 55: W83627Dhg Watchdog Timer Initial Program

    S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B A.2 W83627DHG Watchdog Timer Initial Program Example: Setting 10 sec. as Watchdog timeout interval ;/////////////////////////////////////////////////////////////////////////////////////////////// Mov dx,2eh ;Enter W83627DHG config mode...
  • Page 56 S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B ;/////////////////////////////////////////////////////////////////////////////////////////////// Dec dx Mov al,0f5h ;CRF5 (PLED mode register) Out dx,al Inc dx In al,dx And al,not 08h...

  • Page 57: Appendix B I/O Information

    S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B Appendix I/O Information B - 1 Appendix B I/O Information...

  • Page 58: I/O Address Map

    S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B B.1 I/O Address Map B - 2 Appendix B I/O Information...
  • Page 59 S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B B - 3 Appendix B I/O Information...

  • Page 60: St Mb Memory Address Map

    S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B B.2 1 MB Memory Address Map B - 4 Appendix B I/O Information...

  • Page 61: Irq Mapping Chart

    S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B B.3 IRQ Mapping Chart B.4 DMA Channel Assignments B - 5 Appendix B I/O Information...
  • Page 62 S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B Appendix Mating Connecotor C - 1 Appendix C Mating Connector...
  • Page 63 170220020B Input and Cable PS_ON# SATA SATA Port 2 Molex 67582-0000 1709070500 Cable SATA SATA Port 1 Molex 67582-0000 1709070500 Cable AAEON Catch 1703120130 Expansion I/F Cable External 5V FLYING Power FWAA210 170204010P Input Cable External 12V Power 1702002010 Input...
  • Page 64 S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B Cable UART CN15 COM Port #5 Molex 51021-0900 Wafer 1701090150 Cable CN16 USB Port #6 Molex...
  • Page 65 S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B Keyboard & Cable Mouse External RTC Battery BAT1 Molex 51021-0200 175011901C Connector Cable C - 4...

Table of Contents