Radio Mode; Switching On Radio Mode; Rds Functions (Af, Reg); Switching Reg On/Off - Blaupunkt C30 Operating Instructions Manual

Radio mode

This unit is equipped with an RDS radio
receiver. Nearly all receivable FM sta-
tions transmit a signal that not only car-
ries the programme but also additional
information such as the station name.
The station name appears in the dis-
play as soon as it is received.

Switching on radio mode

If you are in cassette mode:
Press the cassette eject button 7.

RDS functions (AF, REG)

The RDS functions – AF (Alternative
Frequency) and REG (Regional) – ex-
tend your radio's range of functions.
AF: If this RDS function is acti-
vated, the unit automatically carries
out a background search for the
best receivable frequency for the
station that is currently set.
REG: Some radio stations set
aside some of their broadcasting
time for regional programmes that
provide different regional content.
You can use the REG function to
prevent the car radio from switch-
ing to alternative frequencies that
are transmitting different pro-
grammes.
Note:
REG has to be additionally activated/
deactivated in the unit's menu.

Switching REG on/off

Keep pressing the MENU button
; until "REG" appears in the
display.
Press the or
"REG ON" or "REG OFF" appears
in the display.
Press the MENU button ; until
the radio display appears in the
display.

Switching RDS function on/off

To use the RDS functions (AF and
REG), press the RDS button 4.
The RDS functions are active when
"RDS" lights up in the display. When the
RDS functions are switched on, "REG
ON" or "REG OFF" appears briefly in
the display.
Selecting the frequency range /
memory
This unit can receive programmes
broadcast over the UKW (FM), MW and
LW frequency ranges (MW and LW are
not available on the Lübeck C30). There
are three preset memory levels for the
FM range and one for each of the MW
and LW ranges. Five stations can be
stored on each memory level.

Selecting the UKW (FM) memory

Press the FMT or FM button 1 to
switch between the various UKW
memory levels.

Selecting the MW and LW memory

Press the M•L button 5 to switch
between the MW and LW memory
levels (not available on the Lübeck
C30).
RADIO MODE
button : until
19
19