OPERATING ELEMENTS button for unlatching the re- movable release panel BAND button for selection of FM memory levels and the MW or LW wavebands, source selection for radio opera- tion TS button, starts the Travelstore function SCAN button, starts scan func- tion Cassette eject button Cassette slot...
Thank you for choosing a Blaupunkt product. We hope you will enjoy your new equipment. Please read these instructions before using for the first time. Blaupunkt’s edi- tors are constantly working to write clear, generally understandable instructions for use. If you still have questions about...
Release Panel Theft Protection Your device has a removable flip-release panel to protect it from theft. The radio is of no value to a thief with- out this panel. Protect your device from theft by taking the release panel with you whenever you leave the vehicle.
SWITCHING ON AND OFF Switching On and Off The device can be switched on and off in the following ways: Switching On and Off with the Vehicle Ignition If the device is correctly connected to the vehicle ignition, and has not been switched off with button A, it is switched on and off along with the ignition.
Adjusting the Volume The volume can be adjusted in steps from 0 (off) up to 66 (maximum). To increase the volume button @. Press the To reduce the volume button @. Press the Setting Switch-On Volume The volume the device plays at when switched on can be adjusted as follows: Press the MENU button =.
RADIO OPERATION Radio Operation Switching on Radio Operation If the current operating mode is cas- sette, CD-changer or AUX Press the BAND button 2. Press the CD•C button : until “RADIO” appears in the display. Select Waveband/Memory Level This radio receives stations in the FM and AM wavebands.
Saving a Station Saving a Station Manually Choose between memory levels FM1, FM2, FMT or the AM wave- band. Tune to the station you want. Choose one of the station buttons 1-5 > on which you want to store the station, and hold it pressed for longer than one second.
RADIO OPERATION Regional Tuner Settings This device is fitted with a multiband tuner which can be adjusted to specific regional requirements. The regions which can be set are: America, Europe, Asia and Thailand. The radio only of- fers full functionality in other countries if it is set to the region in question.
CASSETTE OPERATION Fast rewind To rewind Side A button 7 until it Press the locks. To rewind Side B button 8 until it Press the locks. “REWIND” appears in the display. Stopping fast winding Press the opposite fast wind but- ton.
CD CHANGER OPERATION Changing Display Contents To change the display between track number plus CD number and track num- ber plus play time Press the MENU button =. button < until Press the “CDC DISP” appears in the display. button <. Press the The current display mode is shown: “TIME”...
CD CHANGER OPERATION Note: The lengths of these samples can be set. Please consult the section on “Setting Scan Time” under “Ra- dio Operation”. Pausing During Play Press button 2 ( ) >. “PAUSE” appears in the display. Continuing after the pause Press button 2 ( ) >...
CLOCK - TIME When the setting process is complete Press the MENU button =. Display the Time When the Device is Switched Off But the Ignition On To display the time when the device is switched off and the ignition is switched Press the MENU button =.
Such sources include portable CD, MiniDisc or MP3 players. To connect an external audio source, you need an adapter cable (Blaupunkt No. 7 607 897 093). The AUX input must be switched on in the menu.
If the statutory minimum guarantee pe- riod in your country is less than 12 months, Blaupunkt provides a 12 month manufacturer’s guarantee. Damage caused by wear, incorrect use or use for commercial purposes are excluded from this guarantee.
Need help?
Do you have a question about the C31 and is the answer not in the manual?
Questions and answers