Table of Contents
Advertisement
OPERATING TIPS
1. Just like other barbecues, the actual temperature of this grill or the cooking times will be
affected by external temperature, humidity, wind conditions, quality of pellets and so on.
2. It is better to shelter your grill from the wind, this will aid in temperature output, heat retention
and heat recovery time when opening the lid.
3. Do not open the lid frequently, it will increase your cooking time. But you can open the lid
when you want the grill to cool down quickly.
4. Please preheat the grill for 15 minutes before placing food. This make your grill to heat up
and quickly return to your desired temperature once your food is placed. Otherwise it will take
a longer time to bring both the grill and the food to your desired cooking temperature.
5. Make sure the flame tamer is properly seated on its locating brackets. The long lips of the
flame tamer should be pointing down over the firepot. If not seated properly, direct heat and
flame could come out from the firepot and cause a grease fire in your grill.
6. Never move your grill while running.
7. Never put water into the pellet hopper or firepot.
8. Never add pellets to firepot directly. It is dangerous. If you run out of pellets and lose your fire
while cooking, let the grill cool down and start again with the INITIAL LIGHTING
INSTRUCTIONS.
9. We recommend you cover your grease drip tray with heavy-duty aluminum foil and change it
frequently. This is the simplest way to maintain your grease drip tray.
Failure to clean the grease drip tray and grease drain tube may cause grease fires. If this
situation happens, turn the switch OFF to reduce the amount of oxygen in the fire box and keep
the lid open until the fire is completely out. AT THE SAME TIME, BE CAREFUL NOT TO BURN
YOURSELF. When the grill is completely cool, clean any grease accumulation from the grease
drip tray. Replace the foil on the grease drip tray. Then restart the grill and resume cooking.
HOW TO USE THE MEAT PROBE
Plug the meat probe into the pellet control panel as shown. Once you press down the Probe
Switch, the temperature will show on the display screen 2 seconds later. It will go back to show
the pellet grill temperature seconds later.
24 of 30
20191010-Ver.1.0
Advertisement
Table of Contents
