Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Kingsford Lone Star CG2240501-KF
Summary of Contents for Kingsford Lone Star CG2240501-KF
- Page 1 Lone Star Charcoal Grill Model number: CG2240501-KF / CG2240506-KF Owner’s Manual Assembly and Operating Instructions Tools required for assembly (not included): Pliers, Phillips and Flathead Screwdrivers, Adjustable Wrench Keep this manual for future reference. 1 of 25 20200225-Ver1...
- Page 2 WARNING ⚫ Only use this grill on a hard, level, non-combustible, stable surface (concrete, ground, etc.) capable of supporting the weight of the grill. Never use on wooden or other surfaces that could burn. ⚫ When the grill is in use, maintain a clearance of at least 1 m (40”) between the hot grill and any combustible materials, such as bushes, trees, wooden decks, wooden fences, buildings, etc.
- Page 3 WARNING ⚫ When grilling, grease from meat may drip into the charcoal and cause a grease fire. If this should happen, close the lid to suffocate the flame. Do not use water to extinguish grease fires. ⚫ Use caution when opening the lid. Keep hands, face and body a safe distance away. Flash flare ups may occur when air comes into contact with fire or hot coals.
-
Page 4: Product Diagram
ASSEMBLY INSTRUCTIONS THANK YOU FOR PURCHASING THIS GRILL Read all safety warnings & assembly instructions carefully before assembling or operating your grill. For missing parts, please call customer service at customerservice@rankam.com or at 1-888-837-1380, Mon to Fri, 8:00 a.m. – 5:00 p.m. Pacific Standard Time. (Proof of purchase will be required.) Inspect contents of the box to ensure all parts are included and undamaged. -
Page 5: Component List
Component List 1. Lid 2. Lid Handle 3. Charcoal Tray 4. Charcoal Tray Adjuster Part number: MET-CG0001 Part number: MET-CG0002 Part number: MET-CG0003 Part number: MET-CG0004 Qty: 1pc Qty: 1pc Qty: 1pc Qty: 2pcs 5. Left Panel 6. Side Shelf 7. - Page 6 17. Axle 18. Wheel 19. Right Leg 20. Right Panel Part number: MET-CG0017 Part number: MET-CG0018 Part number: MET-CG0019 Part number: MET-CG0020 Qty: 1pc Qty: 2pcs Qty: 2pcs Qty: 1pc 21. Back Panel 22. Lower Hinge 23. Cooking Grate 24. Warming Rack Part number: MET-CG0021 Part number: MET-CG0022 Part number: MET-CG0023...
-
Page 7: Hardware List
Hardware List Item No. Item name Diagram M6x10mm Bolt M6x30mm Bolt M6x50mm Bolt M6 Nut M6 Step Bolt M8 Cup Nut Spring Hinge Pin M10 Locking Nut Cotter Pin M10 Washer 7 of 25 20200225-Ver1... - Page 8 M6 Locking Nut Assembly Procedures Symbol: The following symbols will be shown in each procedure for indication of tightening the bolt and nut if necessary. Some steps may require the assistance of a friend. WARNING ⚫ Please wear gloves while assembling the grill. 8 of 25 20200225-Ver1...
- Page 9 Assembly Procedures Step 1 Attach Left and Right Side Panel (5, 20) to Front and Back Panel (12, 21) with Bolts A. Step 2 Attach the Lower Hinges (22) to the grill body assembly with Bolts B. 9 of 25 20200225-Ver1...
- Page 10 Step 3 Attach the Ash Door Handle (14) and the Lock Plate (13) to the ash door with Nut I and Washer K. Step 4 Attach the Air Vent (7) to the grill body assembly with Bolts A and Nuts 10 of 25 20200225-Ver1...
- Page 11 Step 5. Attach the Left Front Leg (8), Left Rear Leg (11) and the Right Legs (19) to the grill body assembly with Bolts C. Step 6. Attach the Bottom Rack (10) to the legs with Bolts A. 11 of 25 20200225-Ver1...
- Page 12 Step 7 Attach the Foot Pads (9) to the left legs. Insert the Axle (17) to the right legs and attach the Wheels (18) to the axle with Nuts I and Washers K as shown. Step 8. Tighten the bolts in steps 1 and 5. 12 of 25 20200225-Ver1...
- Page 13 Step 9 Attach the Chimney (26) to the Lid (1) with Bolts A. Step 10 Attach the Chimney Cover (27) to the chimney with Spring G and Nut 13 of 25 20200225-Ver1...
- Page 14 Step 11 Attach the Upper Hinges (25) to the lid with Bolts B. Step 12 Attach the lid Handle (2) to the lid with Bolts A and Nuts D. 14 of 25 20200225-Ver1...
- Page 15 Step 13 Attach the lid assembly to the grill body assembly and secure with Hinge Pins H and Cotter Pins J. Step 14 Attach the Side Shelf (6) to the left side of the grill body assembly with Bolts E as shown. 15 of 25 20200225-Ver1...
- Page 16 Step 15: Attach the Ash Tray Handle (16) to the Ash Tray (15) with Bolts A. Step 16: Slide the ash tray assembly into the grill as shown. 16 of 25 20200225-Ver1...
- Page 17 Step 17: Place the Charcoal Tray (3) and the Charcoal Tray Adjusters (4) on the bracket at the left and right panel as shown. Step 18: Place the Cooking grates (23) on the grill as shown. 17 of 25 20200225-Ver1...
- Page 18 Step 19. Attach the Warming Rack (24) to the grill and secure with Cotter Pins J as shown. Step 20. Your unit is fully assembled! Make sure to read and follow the Instruction Manual before using this appliance. 18 of 25 20200225-Ver1...
-
Page 19: Preparation For Use & Lighting Instructions
WARNING Place the grill outdoors on a hard, level, non-combustible surface away from roof overhang or any combustible material. Never use on wooden or other surfaces that could burn. Place the grill away from open windows or doors to prevent smoke from entering your house. In windy weather, place the grill in an outdoor area that is protected from the wind. - Page 20 IF USING CHARCOAL CHIMNEY STARTER, PROCEED TO STEP 5. If you choose to use charcoal lighter fluid, ONLY use a product approved for lighting charcoal. Do not use gasoline, kerosene, alcohol or other flammable material for lighting charcoal. Follow all manufacturer’s warnings and instructions regarding the use of their product.
- Page 21 Crumple up the third sheet of newspaper into a ball. Be careful to not crumple too tight. Sprinkle about 1 table spoon of cooking oil on the ball of newspaper. You can also use a few sprits of cooking oil from a spray can. Don’t use too much oil.
-
Page 22: Flavoring Wood
Flavoring Wood To obtain your favorite smoke flavor, experiment by using chunks, sticks or chips of flavor producing wood such as hickory, pecan, apple, cherry, or mesquite. Most fruit or nut tree wood may be used for smoke flavoring. Do not use resinous wood such as pine as it will produce an unpleasant taste. Wood chunks or sticks 7 to 10 cm (3”... -
Page 23: After-Use Safety
Step 4 When charcoal is burning strong again, wear oven mitts/gloves and carefully return the charcoal grates to grill body. Extinguish any hot ashes, coals or embers which may have fallen from the grill or beneath and around the grill. AFTER-USE SAFETY WARNING ⚫... -
Page 24: Limited Warranty
LIMITED WARRANTY Manufacturer warrants this Product to be free from defects in workmanship and materials for a period of 1 year from the date of purchase, PROVIDED claims are submitted, in writing, with proof of purchase. If any part of this item fails because of a manufacturing defect within the Limited Warranty Period, Manufacturer offers to replace such part(s) provide that such parts have not been improperly repaired, altered, or tampered with or subject to misuse, abuse or exposed to corrosive conditions. - Page 25 Hours of Operation: Mon to Fri, 8:00 a.m. – 5:00 p.m. Pacific Standard Time. Made in China KINGSFORD AND THE KINGSFORD LOGO ARE REGISTERED TRADEMARKS OF THE KINGSFORD ® ® ® PRODUCTS COMPANY, LLC AND ARE USED UNDER LICENCE BY RANKAM (CHINA) MANUFACTURING COMPANY LIMITED ALL RIGHTS RESERVED.