Table of Contents
Advertisement
Step 5. Attach the Hopper Handle (5) to the Lower Hopper Assembly (4) using 2 sets bolt
(A) and washer (C). Attach the Upper Hopper Assembly (3) to the Lower Hopper Assembly
(4) using 1 set bolt (G) and nut (F). Lock the Limit Blade in place as shown.
Step 6. Insert the Sealing Strip (20) into the gap between the upper hopper and the lower
hopper assembly as shown.
Reminder: Please do not press down the upper hopper assembly after the sealing strip is
installed.
16 of 30
20191010-Ver.1.0
Advertisement
Table of Contents
